Toyota Corolla Cross: Windshield wiper de-icer
(if equipped)
.png)
Prevent ice from building up on
the windshield and wiper
blades.
When the windshield wiper de-icer
switch is on, the indicator illuminates
on the windshield wiper
de-icer switch.
The windshield wiper de-icer will
automatically turn off after a period
of time.
WARNING
■To prevent burns
Do not touch the glass at lower
part of the windshield or to the
side of the front pillars when the
windshield wiper de-icer is on.
READ NEXT:
■ Location of air outlets
The air outlets and air volume
changes according to the
selected air flow mode.
■ Adjusting the position of
and opening and closing
the air outlets
Front center
Direct
Air outlets are automatically selected and fan speed is automatically
adjusted according to the set temperature setting.
Also, the display and button positions will differ depending on
the type of th
1. Press the automatic mode
switch.
2. Adjust the temperature setting.
3. To stop the operation, press
the off switch.
If the fan speed setting or air
flow modes are operated, the
automatic mode in
SEE MORE:
PARTS LOCATION ILLUSTRATION
*1 SKID CONTROL ECU (BRAKE ACTUATOR ASSEMBLY)
*2 NO. 1 ENGINE ROOM RELAY BLOCK - IGP-MAIN RELAY ILLUSTRATION
*1 NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (FRONT FLOOR)
*2 NO. 3 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (INSIDE LU
RemovalREMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 MAP LIGHT ASSEMBLY
81260A
- - PROCEDURE
1. REMOVE MAP LIGHT ASSEMBLY Click here
InspectionINSPECTION PROCEDURE
1. INSPECT SLIDING ROOF SWITCH (MAP LIGHT
