Toyota Corolla Cross: Warning lights
Warning lights inform the driver of malfunctions in the indicated vehicle's systems.
Brake system warning
light*1
Brake system warning
light*1
Brake system warning
light*1
High coolant temperature
warning light*2
Charging system warning
light*2
Low engine oil pressure
warning light*2
Malfunction indicator
lamp*1
Malfunction indicator
lamp*1
SRS warning light*1
ABS warning light*1
ABS warning light*1
Inappropriate pedal operation
warning light*2
Electric power steering
system warning light*1
Low fuel level warning
light
Driver's and front passenger's
seat belt reminder
light
Rear passengers'
seat belt reminder
lights
Rear passengers'
seat belt reminder
lights
Tire pressure warning
light*1
LTA indicator
LDA indicator
Stop & Start cancel indicator*1
Intuitive parking assist
OFF indicator (if
equipped)
Dynamic radar cruise control
indicator
Cruise control indicator
PCS warning light*1
Intuitive parking assist
OFF indicator (if
equipped)
Driving assist information
indicator*1
Slip indicator*1
Parking brake indicator
Parking brake indicator
Brake hold operated indicator
*1: These lights come on when the
engine switch is turned to ON to
indicate that a system check is
being performed. They will turn
off after the engine is started, or
after a few seconds. There may
be a malfunction in a system if
the lights do not come on, or turn
off. Have the vehicle inspected
by your Toyota dealer.
*2: This light illuminates on the
multi-information display.
*3: 4.2-inch display.
*4: 7-inch display.
WARNING
■If a safety system warning light does not come on
Should a safety system light such as the ABS and SRS warning light not come on when you start the engine, this could mean that these systems are not available to help protect you in an accident, which could result in death or serious injury. Have the vehicle inspected by your Toyota dealer immediately if this occurs.
READ NEXT:
Indicators
The indicators inform the driver
of the operating state of the
vehicle's various systems.
Turn signal indicator
Headlight indicator
Tail light indicator
Headlight high beam indicator
Automatic Hi
Meter display
■ Locations of gauges and meters
The units of measure may differ depending on the intended destination of
the vehicle.
Tachometer
Displays the engine speed in revolutions per minute
Outside tem
SEE MORE:
Multi-axis Acceleration Sensor Module "A" Circuit Voltage Out of Range (C05201C,...,C117828)
DESCRIPTION
The airbag ECU assembly has a built-in yaw rate and acceleration
sensor and detects the vehicle condition.
The skid control ECU (brake actuator assembly) receives signals
from the yaw rate and acceleration sensor (airbag ECU assembly) via CAN communication.
These DTCs may be store
Operation Check
OPERATION CHECK AUTOMATIC LIGHT CONTROL SYSTEM OPERATION CHECK (w/ Automatic Light Control System)
NOTICE: Make sure that the customize settings are set to default when performing the automatic light control system operation check.
Click here (a) Turn the ignition switch to ON.
(b) Turn the lig
