Toyota Corolla Cross: M20a-fks (cooling)
READ NEXT:
ComponentsCOMPONENTS ILLUSTRATION
*1 RESERVE TANK CAP
*2 RADIATOR DRAIN COCK PLUG
*3 NO. 1 ENGINE UNDER COVER ASSEMBLY
- -
N*m (kgf*cm, ft.*lbf): S
On-vehicle InspectionON-VEHICLE INSPECTION PROCEDURE
1. CHECK COOLING FAN SYSTEM (a) Check and ensure the following conditions:
(1) The ignition switch is off. (2) The engine coolant temperature i
SEE MORE:
DESCRIPTION
When the temperature sensor inside the electric brake booster
(brake booster with master cylinder assembly) meets the detection conditions, this
DTC is stored.
DTC No.
Detection Item
DTC Detection Condition
Trouble Area
MIL
INSPECTION
PROCEDURE
1. INSPECT SHIFT LOCK CONTROL ECU
HINT:
If the results of the following inspections are as specified but a malfunction
has occurred, replace the shift lock control unit assembly.
(a) Inspect wire harness:
(1) Disconnect the shift lock control ECU connector.