Toyota Corolla Cross: Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
Stop and Start System|
DTC No. | Detection Item |
MIL | Warning Indicate |
Note | Link |
|---|---|---|---|---|---|
|
P033562 | Crankshaft Position Sensor "A" Signal Compare Failure |
Does not come on | Does not come on (For Mexico Models: Blinks) |
SAE Code: P0335 |
|
|
P055500 | Brake Booster Pressure Sensor(running) |
Does not come on | Blinks |
SAE Code: P0556 |
|
|
P055511 | Brake Booster Pressure Sensor Circuit Short to Ground |
Does not come on | Blinks |
SAE Code: P0557 |
|
|
P055515 | Brake Booster Pressure Sensor Circuit Short to Battery or Open |
Does not come on | Blinks |
SAE Code: P0558 |
|
|
P05552A | Brake Booster Pressure Sensor Signal Stuck In Range |
Does not come on | Blinks |
SAE Code: P0556 |
|
|
P060444 | Internal Control Module Random Access Memory (RAM) Error Data Memory Failure |
Comes on | Does not come on |
SAE Code: P0604 |
|
|
P060629 | Backup Boost Converter "A" Control CPU Signal Invalid |
Comes on (For Mexico Models: Does not come on) |
Does not come on (For Mexico Models: Blinks) |
SAE Code: P0606 |
|
|
P060B1C | Analog to Digital Converter Circuit Voltage Out of Range |
Comes on (For Mexico Models: Does not come on) |
Does not come on (For Mexico Models: Blinks) |
SAE Code: P060B |
|
|
P060B49 | Analog to Digital Converter Internal Electronic Failure |
Comes on (For Mexico Models: Does not come on) |
Does not come on (For Mexico Models: Blinks) |
SAE Code: P060B |
|
|
P060B71 | Analog to Digital Converter Actuator Stuck |
Comes on (For Mexico Models: Does not come on) |
Does not come on (For Mexico Models: Blinks) |
SAE Code: P060B |
|
|
P061511 | Starter Relay Circuit Short to Ground |
Comes on (For Mexico Models: Does not come on) |
Does not come on (For Mexico Models: Blinks) |
SAE Code: P0616 |
|
|
P061515 | Starter Relay Circuit Short to Battery or Open |
Comes on (For Mexico Models: Does not come on) |
Does not come on (For Mexico Models: Blinks) |
SAE Code: P0617 |
|
|
P062F44 | Internal Control Module EEPROM Data Memory Failure |
Comes on | Does not come on |
SAE Code: P062F |
|
|
P085012 | Park/Neutral Switch Circuit Short to Battery |
Does not come on | Does not come on |
SAE Code: P0852 |
|
|
P085014 | Park/Neutral Switch Circuit Short to Ground or Open |
Does not come on | Does not come on |
SAE Code: P0851 |
|
|
P094296 | Hydraulic Pressure Unit Component Internal Failure |
Comes on (For Mexico Models: Does not come on) |
Does not come on (For Mexico Models: Blinks) |
SAE Code: P0942 |
|
|
P0C2B11 | Auxiliary Transmission Fluid Pump Control Module Feedback Signal Circuit Short to Ground |
Comes on (For Mexico Models: Does not come on) |
Does not come on (For Mexico Models: Blinks) |
SAE Code: P0C2D |
|
|
P0C2B15 | Auxiliary Transmission Fluid Pump Control Module Feedback Signal Circuit Short to Battery or Open |
Comes on (For Mexico Models: Does not come on) |
Does not come on (For Mexico Models: Blinks) |
SAE Code: P0C2E |
|
|
P164400 | ECU Internal Error |
Comes on (For Mexico Models: Does not come on) |
Does not come on (For Mexico Models: Blinks) |
SAE Code: P1644 |
|
|
P253014 | Ignition Switch Circuit Short to Ground or Open |
Does not come on | Does not come on (For Mexico Models: Blinks) |
SAE Code: P2531 |
|
|
P279796 | Electromagnetic Oil Pump Component Internal Failure |
Comes on (For Mexico Models: Does not come on) |
Does not come on (For Mexico Models: Blinks) |
SAE Code: P2797 |
|
|
P323A00 | Backup Boost Converter "A" |
Comes on (For Mexico Models: Does not come on) |
Does not come on (For Mexico Models: Blinks) |
SAE Code: P323A |
|
|
P323A16 | Backup Boost Converter "A" Circuit Voltage Below Threshold |
Does not come on | Does not come on (For Mexico Models: Blinks) |
SAE Code: P323A |
|
|
P323B14 | Backup Boost Converter "A" Control Circuit Circuit Short to Ground or Open |
Comes on (For Mexico Models: Does not come on) |
Does not come on (For Mexico Models: Blinks) |
SAE Code: P323D |
|
|
P323B29 | Backup Boost Converter "A" Control Circuit Signal Invalid |
Comes on (For Mexico Models: Does not come on) |
Does not come on (For Mexico Models: Blinks) |
SAE Code: P323C |
|
|
P323B38 | Backup Boost Converter "A" Control Circuit Signal Cycle Invalid |
Comes on (For Mexico Models: Does not come on) |
Does not come on (For Mexico Models: Blinks) |
SAE Code: P323C |
|
|
P33B300 | External BBC Circuit |
Does not come on | Does not come on (For Mexico Models: Blinks) |
SAE Code: P33B3 |
|
|
U010087 | Lost Communication with ECM/PCM "A" Missing Message |
Comes on (For Mexico Models: Does not come on) |
Does not come on (For Mexico Models: Blinks) |
SAE Code: U0100 |
|
|
U010187 | Lost Communication with TCM Missing Message |
Comes on (For Mexico Models: Does not come on) |
Does not come on (For Mexico Models: Blinks) |
SAE Code: U0101 |
|
|
U012687 | Lost Communication with Steering Angle Sensor Module Missing Message |
Does not come on | Does not come on |
SAE Code: U0126 |
|
|
U012987 | Lost Communication with Brake System Control Module Missing Message |
Comes on (For Mexico Models: Does not come on) |
Does not come on (For Mexico Models: Blinks) |
SAE Code: U0129 |
|
|
U014087 | Lost Communication with Body Control Module Missing Message |
Does not come on | Does not come on (For Mexico Models: Blinks) |
SAE Code: U0140 |
|
|
U015187 | Lost Communication with Restraints Control Module Missing Message |
Does not come on | Does not come on (For Mexico Models: Blinks) |
SAE Code: U0151 |
|
|
U015587 | Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message |
Does not come on | Blinks |
SAE Code: U0155 |
|
|
U016487 | Lost Communication with HVAC Control Module Missing Message |
Does not come on | Does not come on (For Mexico Models: Blinks) |
SAE Code: U0164 |
|
|
U115C87 | Lost Communication with ECM/PCM "A" (ch5) Missing Message |
Comes on | Does not come on |
SAE Code: U115C |
|
|
U117087 | Lost Communication With Brake System Control Module(ch2) Missing Message |
Does not come on | Blinks |
SAE Code: U1170 |
|
.gif)
READ NEXT:
VEHICLE CONTROL HISTORY (RoB)
VEHICLE CONTROL HISTORY (RoB) DESCRIPTION
Vehicle Control History (RoB) is a function that captures and stores ECU data when triggered by specific vehicle behavior.
If the customer states th
Crankshaft Position Sensor "A" Signal Compare Failure (P033562)
DESCRIPTION The crankshaft position sensor sends an engine speed signal (NE signal) to the ECM. The engine speed signal is then sent directly from the NEO terminal of the ECM to the engine stop and st
Brake Booster Pressure Sensor(running) (P055500,P05552A)
DESCRIPTION The engine stop and start ECU determines changes in the brake booster assembly pressure based on the voltage signal received from the vacuum sensor assembly in the brake booster assembly.
SEE MORE:
Inspection
INSPECTION
PROCEDURE
1. INSPECT FRONT NO. 1 SPEAKER ASSEMBLY LH (w/o Stereo Component Amplifier)
(a) With the front No. 1 speaker assembly LH installed, check that
there is no looseness or other abnormalities.
(b) Check that there is no foreign matter in the front No. 1 speaker
assembly LH,
Key Cannot be Registered
DESCRIPTION A maximum of 5 key ID codes can be registered. WIRING DIAGRAM
CAUTION / NOTICE / HINT
NOTICE: If the transponder key ECU assembly is replaced, refer to Registration.
Click here PROCEDURE
1.
CHECK REGISTRATION MODE (a) Check that the system enters registration mode.
