Toyota Corolla Cross: Data List / Active Test

Total Distance Traveled

Total distance traveled

Min.: 0, Max.: 16777215

-

-

Total Distance Traveled - Unit

Total Distance Traveled unit

km / mile

-

-

Vehicle Speed

Vehicle speed from speedometer

Min.: 0.0 km/h (0.0 MPH)

Max.: 300.0 km/h (186.4 MPH)

• 0 km/h (0 MPH): Engine running and vehicle stopped
• No significant fluctuation: Engine running and vehicle driven at a constant speed

-

Engine Revolution

Engine speed

Min.: 0 rpm

Max.: 12800 rpm

No significant fluctuation

Engine running at a constant speed

Ready Status

Ready status

OFF or ON

-

-

Battery Voltage

Auxiliary battery voltage

Min.: 0.00 V

Max.: 25.00 V

11 to 14 V

-

Steering Wheel Torque

Steering wheel torque

Min.: -25.001 Nm

Max.: 25.000 Nm

Value changes in proportion to steering effort

- The value increases when turning left and decreases when turning right

Engine running and steering wheel being turned

Steering Angle Velocity

Steering angle speed

Min.: -32768 deg/s

Max.: 32767 deg/s

Value changes in proportion to steering speed

- The value increases when turning left and decreases when turning right

Engine running and steering wheel being turned

Steering Angle

Steering angle

Min.: -3072.0 deg

Max.: 3070.5 deg

-

-

Status of Vehicle Power (IGP PT2)

State of IGP power source(PT2)

OFF or ON

OFF: Ignition switch off

ON: Ignition switch ON

-

Status of Vehicle Power (IGP PT1)

State of IGP power source(PT1)

OFF or ON

OFF: Ignition switch off

ON: Ignition switch ON

-

Status of Vehicle Power (IGP PDC)

State of IGP power source(PDC)

OFF or ON

OFF: Ignition switch off

ON: Ignition switch ON

-

Status of Vehicle Power (IGR PDC)

State of IGR power source(PDC)

OFF or ON

OFF: Ignition switch off

ON: Ignition switch ON

-

IG Power Supply

IG power source voltage

Min.: 0.00 V

Max.: 25.00 V

8 to 16 V

Ignition switch ON

PIG Power Supply

PIG power source voltage

Min.: 0.00 V

Max.: 25.00 V

9 to 16 V

Engine running and steering wheel being turned

Thermistor Temperature

ECU substrate temperature

Min.: -50.0°C (-58.0°F)

Max.: 200.0°C (392.0°F)

-50°C to 200°C (-58°F to 392°F)

-

Power Source

Operating state of hybrid system

Operating State or Stopped State

Operating State: Engine running

Stopped State: Engine running

-

PS Assist Signal

Status of the record of power steering assist signal

Assist Stop or Under an Assist

OFF: Assist stop

ON: Under an assist

-

Synchronization Status of PWM

Modulation synchronization state of the motor pulse wave duty ratio

Synchronization State / Non-Synchronization State

Synchronization State: Synchronized

Non-Synchronization State: Not synchronized

-

Cooperation Control State

Power steering operation control state

Cooperation Control / Other than Cooperation Control

Cooperation Control: Cooperation control

Other than Cooperation Control: Other than cooperation control

-

Middle Voltage of Other Systems

Middle voltage of other systems

0.00 to 25.00 V

-

-

Torque Sensor 1 Output

Torque sensor 1 output value

Min.: -25.000 Nm

Max.: 25.000 Nm

-

-

Torque Sensor 2 Output

Torque sensor 2 output value

Min.: -25.000 Nm

Max.: 25.000 Nm

-

-

Torque Sensor 3 Output

Torque sensor 3 output value

Min.: -25.000 Nm

Max.: 25.000 Nm

-

-

Torque Sensor 4 Output

Torque sensor 4 output value

Min.: -25.000 Nm

Max.: 25.000 Nm

-

-

Torque Sensor 1 Zero Point Value

Torque sensor 1A zero point compensation value

-

-

Although the item is displayed on the GTS, it is not applicable to the vehicle.

Torque Sensor 2 Zero Point Value

Torque sensor 1B zero point compensation value

-

-

Although the item is displayed on the GTS, it is not applicable to the vehicle.

Torque Sensor 3 Zero Point Value

Torque sensor 2A zero point compensation value

-

-

Although the item is displayed on the GTS, it is not applicable to the vehicle.

Torque Sensor 4 Zero Point Value

Torque sensor 2B zero point compensation value

-

-

Although the item is displayed on the GTS, it is not applicable to the vehicle.

Motor 1 U Phase Current

Motor 1 terminal current (U phase)

Min.: -327.68 A

Max.: 327.67 A

Value changes in proportion to steering effort

Engine running and steering wheel being turned

Motor 1 V Phase Current

Motor 1 terminal current (V phase)

Min.: -327.68 A

Max.: 327.67 A

Value changes in proportion to steering effort

Engine running and steering wheel being turned

Motor 1 W Phase Current

Motor 1 terminal voltage (W phase)

Min.: -327.68 A

Max.: 327.67 A

Value changes in proportion to steering effort

Engine running and steering wheel being turned

Motor 1 U Phase Duty

Motor 1 U phase duty

Min.: 0.00%

Max.: 100.00%

-

-

Motor 1 V Phase Duty

Motor 1 V phase duty

Min.: 0.00%

Max.: 100.00%

-

-

Motor 1 W Phase Duty

Motor 1 W phase duty

Min.: 0.00%

Max.: 100.00%

-

-

Motor 1 U Phase Terminal Voltage

Motor 1 U phase terminal voltage

0.00 to 100.00 V

-

-

Motor 1 V Phase Terminal Voltage

Motor 1 V phase terminal voltage

0.00 to 100.00 V

-

-

Motor 1 W Phase Terminal Voltage

Motor 1 W phase terminal voltage

0.00 to 100.00 V

-

-

Motor 1 Power Supply

Power supply voltage to active motor 1

Min.: 0.00 V

Max.: 25.00 V

9 to 16 V

Engine running and steering wheel being turned

Motor 2 U Phase Current

Motor 2 terminal current (U phase)

Min.: -327.68 A

Max.: 327.67 A

Value changes in proportion to steering effort

Engine running and steering wheel being turned

Motor 2 V Phase Current

Motor 2 terminal current (V phase)

Min.: -327.68 A

Max.: 327.67 A

Value changes in proportion to steering effort

Engine running and steering wheel being turned

Motor 2 W Phase Current

Motor 2 terminal current (W phase)

Min.: -327.68 A

Max.: 327.67 A

Value changes in proportion to steering effort

Engine running and steering wheel being turned

Motor 2 U Phase Duty

Motor 2 U phase duty

Min.: 0.00%

Max.: 100.00%

-

-

Motor 2 V Phase Duty

Motor 2 V phase duty

Min.: 0.00%

Max.: 100.00%

-

-

Motor 2 W Phase Duty

Motor 2 W phase duty

Min.: 0.00%

Max.: 100.00%

-

-

Motor 2 U Phase Terminal Voltage

Motor 2 U phase terminal voltage

0.00 to 100.00 V

-

-

Motor 2 V Phase Terminal Voltage

Motor 2 V phase terminal voltage

0.00 to 100.00 V

-

-

Motor 2 W Phase Terminal Voltage

Motor 2 W phase terminal voltage

0.00 to 100.00 V

-

-

Motor 2 Power Supply

Power supply voltage to active motor 2

Min.: 0.00 V

Max.: 25.00 V

-

-

Motor Rotation Angle 1

Motor rotation angle 1

0.0 to 360.1 deg / Unknown

-

-

Motor Rotation Angle 2

Motor rotation angle 2

0.0 to 360.1 deg / Unknown

-

-

Motor Rotation Angle 3

Motor rotation angle 3

0.0 to 360.1 deg / Unknown

-

-

Motor Rotation Angle 4

Motor rotation angle 4

0.0 to 360.1 deg / Unknown

-

-

Motor Rotation Angle Sensor 1 Sin Voltage

Rotation angle sensor Sin1 output voltage used for rotation angle calculation

Min.: 0.00 V

Max.: 5.00 V

-

-

Motor Rotation Angle Sensor 1 Cos Voltage

Rotation angle sensor Cos1 output voltage used for rotation angle calculation

Min.: 0.00 V

Max.: 5.00 V

-

-

Motor Rotation Angle Sensor 2 Sin Voltage

Rotation angle sensor Sin2 output voltage used for rotation angle calculation

Min.: 0.00 V

Max.: 5.00 V

-

-

Motor Rotation Angle Sensor 2 Cos Voltage

Rotation angle sensor Cos2 output voltage used for rotation angle calculation

Min.: 0.00 V

Max.: 5.00 V

-

-

Motor Rotation Angle Sensor 3 Sin Voltage

Rotation angle sensor Sin3 output voltage used for rotation angle calculation

Min.: 0.00 V

Max.: 5.00 V

-

-

Motor Rotation Angle Sensor 3 Cos Voltage

Rotation angle sensor Cos3 output voltage used for rotation angle calculation

Min.: 0.00 V

Max.: 5.00 V

-

-

Turn Counter 1

Turn counter 1

0 to 1024

-

-

Turn Counter 2

Turn counter 2

0 to 1024

-

-

Absolute Angle (Pinion Angle)

Absolute angle (Pinion angle)

-32.768 to 32.768 rad

-

-

Steering Angle for the Steering Assembly

Steering angle for the steering assembly

-1877.5 to 1877.6 deg / Unknown

-

-

Status of Learned Left/Right End Position for End Torque Limit Control

Status of learned left/right end position for the end torque limit control

Left Direction (Unlearned) & Right Direction (Unlearned) / Left Direction (Unlearned) & Right Direction (Temporary Position) / Left Direction (Unlearned) & Right Direction (Decision Position) / Left Direction (Temporary Position) & Right Direction (Unlearned) / Left Direction (Temporary Position) & Right Direction (Temporary Position) / Left Direction (Temporary Position) & Right Direction (Decision Position) / Left Direction (Decision Position) & Right Direction (Unlearned) / Left Direction (Decision Position) & Right Direction (Temporary Position) / Left Direction (Decision Position) & Right Direction (Decision Position) / Reading Impossibility

-

This item is displayed but not used

Learned End Current Position for End Torque Limit Control

Learned end current position for the end torque limit control

-3276.8 to 3276.6 deg / Unknown

-

This item is displayed but not used

Learned Left End Position for End Torque Limit Control

Learned left end position for the end torque limit control

-3276.8 to 3276.6 deg / Unknown

-

This item is displayed but not used

Learned Right End Position for End Torque Limit Control

Learned right end position for the end torque limit control

-3276.8 to 3276.6 deg / Unknown

-

This item is displayed but not used

Super High Speed Steering Angle Speed Abnormality Number of Times

Super high speed steering angle speed abnormality count

0 to 255

-

This item is displayed but not used

Number of Learned End Position Resets

Number of Learned End Position Resets

Min.: 0

Max.: 255

-

-

Motor Actual Current (Q Axis)

Detected current flow to motor (detected current of axis q)

Min.: -327.68 A

Max.: 327.67 A

-

-

Command Value Current (Q Axis)

Target current flow to motor (requested current of axis q)

Min.: -327.68 A

Max.: 327.67 A

-

-

Motor Actual Current 2 (D Axis)

Detected current flow to motor (detected current of axis d)

Min.: -327.68 A

Max.: 327.67 A

-

-

Command Value Current 2 (D Axis)

Target current flow to motor (requested current of axis d)

Min.: -327.68 A

Max.: 327.67 A

-

-

Motor Rotation Angle

Motor rotation angle (detected by rotation sensor)

Min.: 0.0 deg

Max.: 360.0 deg

-

-

Final Motor Current limited (Q Axis)

Final motor current set limit (request current of axis q)

Min.: 0.00 A

Max.: 327.67 A

-

-

Steering Angle Sensor Signal State

State of steering angle sensor signal

Usable, Unlearned, Sensor Fault or Communication Fault

-

-

Eco-Run Control Mode

Engine stop and start system control mode

Eco Mode0 / Eco Mode1 / Eco Mode2 / Eco Mode3 / Eco Mode4

-

-

CAN Vehicle Speed (Speed Sensor RR)

Speed sensor RR value sent via CAN

Min.: 0 km/h (0 MPH)

Max.: 255 km/h (158 MPH)

• 0 km/h (0 MPH): Engine running and vehicle stopped
• No significant fluctuation: Engine running and vehicle driven at a constant speed

-

CAN Vehicle Speed (Speed Sensor RL)

Speed sensor RL value sent via CAN

Min.: 0 km/h (0 MPH)

Max.: 255 km/h (158 MPH)

• 0 km/h (0 MPH): Engine running and vehicle stopped
• No significant fluctuation: Engine running and vehicle driven at a constant speed

-

CAN Vehicle Speed (SP1)

Vehicle speed input value sent via CAN (equal to value indicated on speedometer)

Min.: 0 km/h (0 MPH)

Max.: 300 km/h (186 MPH)

• 0 km/h (0 MPH): Engine running and vehicle stopped
• No significant fluctuation: Engine running and vehicle driven at a constant speed

-

CAN Steering Angle Speed (SSAV)

Steering wheel turning speed value sent via CAN

Min.: -32768 deg/s

Max.: 32767 deg/s

-

-

Battery Voltage Drop History

Number of times vehicle auxiliary battery voltage dropped

Min.: 0

Max.: 255

-

-

Engine Revolution Ready Signal Communication Failure History

Vehicle speed input value sent via CAN (equal to value indicated on speedometer)

Min.: 0

Max.: 255

-

-

Steering Angle Sensor Signal Communication Failure History

Number of times steering angle sensor signal was interrupted

Min.: 0

Max.: 255

-

-

Vehicle Speed Signal Invalid History

Number of times steering angle sensor signal was interrupted

Min.: 0

Max.: 255

-

-

Overheat Prevention Control History

Number of times assist limit performed due to estimated temperature of power steering ECU and motor coil

Min.: 0

Max.: 255

-

-

Power Supply Voltage Drop Control History

Number of times assist limit performed due to auxiliary battery voltage having dropped to 9 V or less

Min.: 0

Max.: 255

-

-

Power Supply Voltage Drop Restraint Control History

Number of times assist limit performed due to auxiliary battery voltage having dropped to 9.7 V or less

Min.: 0

Max.: 255

-

-

Engine Stall/READY OFF Control History

Number of times assist limit performed due to engine stall

Min.: 0

Max.: 255

-

-

High Load Continuous Control Number of Times

Number of times assist limit performed to prevent motor from overheating when overloaded due to steering wheel being turned to full lock position for an extended period of time, tire pressing against curbstone, etc.

Min.: 0

Max.: 255

-

-

Vehicle Speed Signal Fault Control History

Number of times assist power set to a value suitable for high-speed driving when driving at high speeds due to an abnormal vehicle speed signal

Min.: 0

Max.: 255

-

-

Chassis Power Supply Management EPS Control History

Number of times that assist system was restricted by chassis power management

Min.: 0

Max.: 255

-

-

Load Control History

Number of times electric load limited to ensure stable vehicle power when power steering could not function appropriately or auxiliary battery voltage was too low to ensure stable power steering

Min.: 0

Max.: 255

-

-

Control State Information

Control status information

Min.: 0

Max.: 65535

-

Although the item is displayed on the GTS, it is not applicable to the vehicle.

ASIC State Information

Integrated circuit state information

Min.: 0

Max.: 65535

-

Although the item is displayed on the GTS, it is not applicable to the vehicle.

ECU Overheat Prevention Part

Internal component of ECU for which overheat protection control is performed

No Target Part, Inverter MOS, Power Supply Relay MOS, Custom IC, Choke Coil, H Bridge MOS, Motor Relay MOS, Around Microcomputer or DBC

-

-

ECU Estimate Temperature of Overheat Prevention Part

Estimated temperature of internal component of ECU for which overheat protection control is performed

Min.: -50.0°C (-58.0°F)

Max.: 200.1°C (392.2°F)

-

-

Motor Overheat Prevention Part

Internal component of motor for which overheat protection control is performed

No Target Part or Motor

-

-

Motor Estimate Temperature of Overheat Prevention Part

Estimated temperature of internal component of motor for which overheat protection control is performed

Min.: -50.0°C (-58.0°F)

Max.: 200.1°C (392.2°F)

-

-