Toyota Corolla Cross: Check For Intermittent Problems
CHECK FOR INTERMITTENT PROBLEMS
NOTICE:
- If the vehicle or vehicle controls are operated (for example, during initial inspection when the vehicle is brought in for repair) before vehicle control history (RoB) has been read out and saved, the vehicle control history (RoB) information could be lost.
- The function "Read vehicle control history (RoB)" uses the current system time setting inside the GTS and the time counter inside the controlling ECU to calculate the timings shown in the vehicle control history (RoB). For this reason, before reading out the vehicle control history (RoB), first make sure that the GTS system clock is accurately set to the current time.
- The time counter in the control ECU may deviate by up to +/- 10% due to the characteristics of the time counter.
- The time counter in the control ECU is reset approximately 34 days before the "Current" value due to the characteristics of the time counter. Therefore, the time information stored before the 34th day may not be accurately displayed.
VEHICLE CONTROL HISTORY (ROB)
HINT:
Vehicle control history (RoB): The main body ECU (multiplex network body ECU) records the power door lock control system vehicle control history (RoB), which can be read out using the GTS.
(a) Enter the following menus:
Body Electrical > Main Body > Utility|
Tester Display |
|---|
| Vehicle Control History (RoB) |
(b) Following the instructions on the screen, save the vehicle control history (RoB).
|
Code | Item |
Item Description | Note |
|---|---|---|---|
|
X2304 | Security Alarm Operation |
Security alarm is to store a factor when activated. |
The factor that triggered the security alarm is stored. |
|
X2305 | Intrusion Operation |
The set value is stored when the intrusion sensor is turned off or when the sensitivity setting is changed. |
When the setting of the intrusion sensor is changed, the setting value is stored. |
|
Item List |
|---|
| Battery Desorption |
|
Hood Open |
| Luggage / Back Door Open |
|
FR Door Open |
| FR Door Unlock |
|
IG |
| Intrusion Sensor |
|
Glass Sensor |
| Inclination Sensor |
|
FL Door Open |
| RR Door Open |
|
RL Door Open |
| FL Door Unlock |
|
RR Door Unlock |
| RL Door Unlock |
|
Back Door Unlock |
|
Detect Intrusion Sensor Window Open |
|
Panic Alarm |
|
Intrusion Sensor OFF |
|
Intrusion Sensor OFF Cancel |
|
Intrusion Sensor Sound Setting |
|
Intrusion Sensor Window Open Setting |
|
Intrusion Sensor Sensitivity Level Down |
|
Intrusion Sensor Sound Detection Cancel |
HINT:
Depending on the specifications of the vehicle some items may not be displayed.
SYMPTOM SIMULATION
Click here .gif)
READ NEXT:
Customize Parameters
CUSTOMIZE PARAMETERS CUSTOMIZE THEFT DETERRENT SYSTEM
NOTICE:
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE NOTICE: Before replacing the main body ECU (multiplex network body ECU), refer to Registration.
for HEV Model: Click here for Gasoline Model:
Click here
HINT:
Trou
Terminals Of Ecu
TERMINALS OF ECU CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND POWER DISTRIBUTION BOX ASSEMBLY
(a) Remove the main body ECU (multiplex network body ECU) from the power distribution box assem
SEE MORE:
Removal
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 PRECAUTION
-
- -
2 CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL
- -
- -
3 REAR CENTER SEAT OUTER BELT ASSEMBLY
-
Hybrid/EV Battery Current Sensor "A" Circuit Short to Ground (P0ABF11,P0ABF15,P0B0E11,P0B0E15,P1CBB12,P1CBB14)
DESCRIPTION A battery current sensor, which is mounted on the positive cable side of each HV battery junction block assembly, detects the current flowing to or from the battery pack. The battery current sensor sends a voltage, which varies between 0 and 5 V in proportion to the amperage, to the IB0
