Toyota Corolla Cross: Changing the meter display
The multi-information display is operated using the meter control switches.
-
: Select menu icons,
scroll the screen and move
the cursor
: Change displayed
content, scroll the screen and
move the cursor - Press: Enter/Set
Press and hold: Reset/Display customizable items - Return to the previous screen
- Call sending/receiving and history display
Linked with the hands-free system, sending or receiving call is displayed.
For details regarding the hands-free system, refer to the "MULTIMEDIA OWNER'S MANUAL".
Content of driving information
■ Display items
- Fuel economy
- Eco Driving Indicator/Driving range
■ Fuel economy
Use the displayed values as a reference only.
- Current fuel consumption
Displays instantaneous current fuel consumption.
- Average fuel economy (after start)
To reset the average fuel economy display, press and hold the meter control switch.
The average fuel economy display
can be changed in
.
- Average fuel economy (after start)
Displays the average fuel consumption since engine start.
- Average fuel economy (after refuel)
Displays the average fuel consumption since the vehicle was refueled.
■ Eco Driving Indicator/Driving range
- Eco Driving Indicator
.png)
- Eco Driving Indicator Light
During Eco-friendly acceleration (Eco driving), the Eco Driving Indicator Light will turn on. When the acceleration exceeds the Zone of Eco driving, or when the vehicle is stopped, the light turns off.
- Eco Driving Indicator Zone Display
Suggests the Zone of Eco driving with current Eco driving ratio based on acceleration.
- Eco driving ratio based on acceleration
If the acceleration exceeds the Zone of Eco driving, the right side of the Eco Driving Indicator Zone Display will illuminate.
At this time, the Eco Driving Indicator Light will turn off.
- Zone of Eco driving
- Driving range
Displays driving range with remaining fuel. Use the displayed values as a reference only.
This distance is computed based on your average fuel consumption.
As a result, the actual distance that can be driven may differ from that displayed.
When only a small amount of fuel is added to the tank, the display may not be updated.
When refueling, turn the engine switch off. If the vehicle is refueled without turning the engine switch off, the display may not be updated.
■Eco Driving Indicator
Eco Driving Indicator will not operate under the following conditions:
- The shift lever is in any position other than D.
- The vehicle speed is approximately 80 mph (130 km/h) or higher.
READ NEXT:
Driving support system
information display
■ Driving support system
information
Select to display the operational
status of the following systems:
Dynamic radar cruise control
LTA (Lane Tracing Assist)
LDA (Lane Departure Alert)
■ Nav
Vehicle information display
■ Drive information
Displays drive information such as
the following:
Drive information 1
Drive information 2
Displays the following depending
on which drive information
type and drive informat
Settings display
■ Meter display settings that
can be changed
Language
Select to change the language displayed.
Units
Select to change the units of measure
displayed.
Meter Type
Select to change the meter t
SEE MORE:
Lost Communication with Side Obstacle Detection Control Module "A" (ch2) Missing
Message (U117787,U117887)
DESCRIPTION
This DTC is output when the clearance warning ECU assembly detects
lost communication with the blind spot monitor sensor.
DTC No.
Detection Item
DTC Detection Condition
Trouble Area
U117787
Lost Communication wit
Terminals Of Ecm
TERMINALS OF ECM
HINT:
The standard normal voltage and resistance between each pair of ECM terminals
is shown in the table below. The appropriate conditions for checking each pair of
terminals are also indicated. The result of checks should be compared with the standard
normal voltage and
