Toyota Corolla Cross: Removal

REMOVAL

CAUTION / NOTICE / HINT

Procedure		Part Name Code
1	FRONT SEAT ASSEMBLY	-	-	-	-
2	SEPARATE TYPE FRONT SEATBACK COVER	71073S	-	-	-
3	FRONT SEAT INNER BELT ASSEMBLY	73230	-	-	-

CAUTION / NOTICE / HINT

CAUTION:

Be sure to read Precaution thoroughly before servicing.

Click here

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during the front seat inner belt assembly removal/installation are shown below.

HINT:

When the cable is disconnected/reconnected to the auxiliary battery terminal, systems temporarily stop operating. However, each system has a function that completes learning the first time the system is used.

• Learning completes when vehicle is driven

  Effect / Inoperative Function When Necessary Procedures are not Performed	Necessary Procedures	Link
  *A: for Gasoline Model
  Front Camera System	Drivre the vehicle straight ahead at 15 km/h (10mph) or more for 1 second or more.
  Stop and start system *A	Drive the vehicle until stop and start control is permitted (appoximately 5 to 60 minutes)

• Learning completes when vehicle is operated normally

  Effect / Inoperative Function When Necessary Procedures are not Performed	Necessary Procedures	Link
  Power door lock control system Back door opener	Perform door unlock operation with door control switch or electrical key transmitter sub-assembly switch.
  Power back door system	Fully close the back door by hand. HINT: Initialization is not necessary if the above procedures are performed while the back door is closed.
  Air conditioning system	After the ignition switch is turned to ON, the servo motor standard position is recognized.	-

PROCEDURE

1. REMOVE FRONT SEAT ASSEMBLY

for Manual Seat: Click here for Power Seat: Click here

2. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER

HINT:

Use the same procedure as for the driver side.

Click here

3. REMOVE FRONT SEAT INNER BELT ASSEMBLY

(a) for Driver Side Manual Seat:

(b) for Driver Side Power Seat:

(c) for Front Passenger Side:

READ NEXT: