Toyota Corolla Cross: Removal

Toyota Corolla Cross (2022-2025) Service Manual / Vehicle Interior / Seat Belt / Rear Seat Inner Belt Assembly (for Rh Side) / Removal

REMOVAL

CAUTION / NOTICE / HINT

COMPONENTS (REMOVAL)

Procedure		Part Name Code
1	REAR CENTER SEAT OUTER BELT ASSEMBLY	73350C	-	-	-
2	BENCH TYPE REAR SEAT CUSHION ASSEMBLY	-		-	-
3	REAR SEAT CUSHION LOCK HOOK	72693	-	-	-
4	REAR SEAT INNER BELT ASSEMBLY	73580B	-	-	-

*A	for Gasoline Model	*B	for HEV Model
●	Non-reusable part	-	-

PROCEDURE

1. DISCONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY

Click here

2. REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY

for Gasoline Model:
Click here
for HEV Model:
Click here

3. REMOVE REAR SEAT CUSHION LOCK HOOK

Click here

4. REMOVE REAR SEAT INNER BELT ASSEMBLY

HINT:

The bolt cannot be removed from the rear seat inner belt assembly.

SEE MORE:

Removal

REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during cylinder head gasket removal/installation are shown below. Necessary Procedures After Parts Removed/In

Operation Check

OPERATION CHECK CHECK SRS WARNING LIGHT (a) Primary check (1) Turn the ignition switch to ON and check that the SRS warning light turns on. (2) Turn the ignition switch off. Wait for at least 2 seconds, then turn the ignition switch to ON. The SRS warning light comes on for approximately 6 seco

Toyota Corolla Cross: Removal

READ NEXT:

Inspection

Installation

Rear Seat Outer Belt Assembly

SEE MORE:

Removal

Operation Check