Toyota Corolla Cross: Problem Symptoms Table
PROBLEM SYMPTOMS TABLE
HINT:
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuses and relays related to this system before inspecting the suspected areas below.
Acoustic Vehicle Alerting System
|
Symptom | Suspected Area |
Link |
| Sound is not produced |
Refer to "There is No Sound Made" |
.gif) |
READ NEXT:
TERMINALS OF ECU CHECK VEHICLE APPROACHING SPEAKER CONTROLLER
(a) Disconnect the I256 vehicle approaching speaker controller connector.
(b) Measure the voltage and resistance according to the value
DATA LIST / ACTIVE TEST DATA LIST NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a p
DIAGNOSTIC TROUBLE CODE CHART Acoustic Vehicle Alerting System
DTC No. Detection Item
Link B135013
Acoustic Vehicle Alerting Speaker Circuit Open
B135019 Acoustic
SEE MORE:
DESCRIPTION
The brake hold standby indicator light turns on if brake hold
control is possible when the following conditions required for operation standby
are met and the brake hold switch (electric parking brake switch assembly) is pressed
while the ignition switch is ON.
Conditions requ
CAUTION / NOTICE / HINT
NOTICE:
Do not perform "Smart Code Reset" (all key ID erasure) until all malfunctions and symptoms have been confirmed and resolved. If all key ID erasure is performed without confirming or resolving malfunctions, key registration will be unable to be performed, resulti
