Toyota Corolla Cross: Power Seat Switch
READ NEXT:
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 FRONT SEAT ASSEMBLY
- -
- -
2 FRONT SEAT FRONT CUSHION
INSPECTION PROCEDURE 1. INSPECT FRONT POWER SEAT SWITCH
(a) Check the resistance.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance: Slide Switch
INSTALLATION CAUTION / NOTICE / HINT COMPONENTS (INSTALLATION)
Procedure Part Name Code
1 FRONT POWER SEAT SWITCH
84922 -
- -
2 SEAT AD
SEE MORE:
Vertical movement adjusting
bolts
Adjustment bolt A
Adjustment bolt B
Before checking the headlight
aim
Make sure the vehicle has a
full tank of gasoline and the
area around the headlight is
not deformed.
Park the vehicle on level
ground.
Make sure the tire inflation
pressure is at the
MONITOR DESCRIPTION A monitor will run when the engine is started at an engine coolant temperature of -10 to 50°C (14 to 122°F). If certain conditions are met, a DTC is stored after the engine idles for 13 seconds (2 trip detection logic).
This DTC is designed to monitor the ignition timing at c
Removal
Headlight aim
