Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: Operation Check

OPERATION CHECK

CHECK CUSTOMIZE PARAMETERS

NOTICE:

The operation check below is based on the non-customized initial condition of the vehicle.

Click here

CHECK BASIC FUNCTION

(a) Check that all doors lock when the lock side of the door control switch is pressed.

(b) Check that all doors unlock when the unlock side of the door control switch is pressed.

(c) Check that all doors lock when the door key cylinder is turned to lock using the mechanical key.

(d) Check that only the driver door unlocks when the driver door lock cylinder is turned to unlock once using the mechanical key and all doors unlock when it is turned to unlock again.*1

(e) Check that all doors unlock when the driver door key cylinder is turned to unlock using the mechanical key.*2

  • *1: Customize item "Unlock Key Twice Function" is set to "Enable".
  • *2: Customize item "Unlock Key Twice Function" is set to "Disable".

CHECK KEY LOCK-IN PREVENTION FUNCTION

NOTICE:

In order to prevent the key from being locked in the vehicle, the following inspection should be performed with the driver door window open.

(a) Turn the ignition switch to ON or ACC.*1

(b) Insert the key into the ignition key cylinder.*2

(c) With the driver door open, check that all of the doors unlock immediately after the door lock knob for the driver door is pressed.

(d) With the driver door open, check that all of the doors unlock immediately after the lock side of the door control switch is pressed.

(e) With the driver door open, press the driver door lock knob and hold it for 2 seconds or more, then close the driver door and check that all of the doors unlock.

  • *1: w/ Smart Key System
  • *2: w/o Smart Key System

CHECK SECURITY FUNCTION OF THE DOOR LOCK CONTROL SYSTEM

(a) Close all doors and leave the driver door window open so that the door control switch can be operated from outside the vehicle. (Step 1)

(b) Hold the outside handle of the driver door, open and close the door while holding the handle open (confirm that the lock knob remained in the lock position). Then, check that the doors do not unlock when the unlock side of the door control switch is pressed from outside the vehicle.

(c) Starting from Step 1, with the key outside the vehicle, close and lock the driver door using the mechanical key. Then, check that the doors do not unlock when the unlock side of the door control switch is pressed from outside the vehicle.

(d) Starting from Step 1, with the key outside the vehicle, close and lock the driver door using wireless key operation or entry operation*1. Then, check that the doors do not unlock when the unlock side of the door control switch is pressed from outside the vehicle.

HINT:

Check that the security function of the door lock control system is canceled under the following conditions:

  • The hybrid control system is started.*1
  • The engine is started.*2
  • The unlock side of the door control switch is pressed when the lock position of any door is unlock.
  • The doors are unlocked by using the mechanical key.
  • The doors are unlocked by wireless operation.
  • The doors are unlocked by entry operation. (w/ Smart Key System)
    • *1: for HEV Model
    • *2: for Gasoline Model

CHECK SHIFT LINKED AUTOMATIC DOOR LOCK FUNCTION

HINT:

The shift linked automatic door lock function can be customized. Make sure that function is ON before this procedure.

Click here

(a) With the shift lever in P and the hybrid control system has started, check that all doors lock automatically when the shift lever is moved to any position other than P.

CHECK SPEED-SENSITIVE AUTOMATIC DOOR LOCK FUNCTION

HINT:

The speed-sensitive automatic door lock function can be customized. Make sure that this function is "ON" before this procedure.

Click here

(a) When any door is unlocked and the vehicle is driven at approximately 20 km/h (12 mph) or more, check that all doors lock automatically.

CHECK SHIFT LINKED AUTOMATIC DOOR UNLOCK FUNCTION

HINT:

The shift linked automatic door unlock function can be customized. Make sure that function is ON before this procedure.

Click here

(a) With the shift lever in any position other than P and the hybrid control system has started, check that all doors unlock automatically when the shift lever is moved to P.

CHECK DRIVER DOOR-LINKED AUTOMATIC DOOR UNLOCK FUNCTION

HINT:

The driver door-linked automatic door unlock function can be customized. Make sure that this function is "ON" before performing.

Click here

(a) When the driver door is closed, turning the ignition switch from ON to off and opening the driver door within approximately 45 seconds will automatically unlock all doors.

CHECK KEY-LINKED 2-STEP UNLOCK FUNCTION

HINT:

The key-linked 2-step unlock function can be customized. Make sure that function is ON before this procedure.

Click here

(a) Lock all doors.

(b) Check that only the driver door unlocks when the driver door lock cylinder is turned to unlock once using the key and all doors unlock when it is turned to unlock again.

CHECK THE DRIVER SIDE KEY-LINKED DOOR LOCK/UNLOCK PROHIBITION FUNCTION

(a) With the ignition switch is ON and the driver side seat belt fastened, check that the door lock/unlock functions do not operate when performing driver side door key-linked operation from outside the vehicle.

CHECK ILLUMINATED ENTRY FUNCTION

Click here

    READ NEXT:

     Customize Parameters

    CUSTOMIZE PARAMETERS CUSTOMIZE POWER DOOR LOCK CONTROL SYSTEM HINT: The following items can be customized. NOTICE: When the customer requests a change in a function, first make sure that the f

     Initialization

    INITIALIZATION BACK DOOR LOCK (a) When the auxiliary battery is reconnected: If the back door is locked and therefore cannot be opened, it is necessary to unlock the back door using the door control

     Problem Symptoms Table

    PROBLEM SYMPTOMS TABLE NOTICE: If the main body ECU (multiplex network body ECU) is replaced, refer to the Registration.* for HEV Model: Click here for Gasoline Model: Click here *: w/

    SEE MORE:

     Data List / Active Test

    DATA LIST / ACTIVE TEST DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not. HINT: Using the GTS to read the Data List allows the values or states of swit

     Check Bus 4 Line

    DESCRIPTION Symptom Trouble Area There are ECUs or sensors that display a communication stop on the bus diagnostic screen. Or, there are ECUs or sensors that display communication stop history on the "Detail" screen. CAN main

    © 2020-2024 Copyright www.tcorollacross.com