Toyota Corolla Cross: Customize Parameters
CUSTOMIZE PARAMETERS
CUSTOMIZE POWER DOOR LOCK CONTROL SYSTEM
HINT:
The following items can be customized.
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
(a) Customizing with the GTS
(1) Select the setting by referring to the table below.
Door Lock|
Tester Display | Description |
Default | Setting |
ECU |
|---|---|---|---|---|
| Unlock Key Twice Function |
Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors. |
Enable | $00:Disable,$01:Enable |
Main body ECU (multiplex network body ECU) |
|
Automatic Door Lock Setting |
| Link Shift |
$00:OFF,$01:Link Shift,$02:Link Speed |
Main body ECU (multiplex network body ECU) |
|
Automatic Door Unlock Setting |
| Link Shift |
$00:OFF,$01:Link D-Door,$02:Link Shift |
Main body ECU (multiplex network body ECU) |
(b) Customizing with the Multi-display
(1) Select the setting by referring to the table below.
|
Display | Default |
Content | Setting |
Relevant ECU |
|---|---|---|---|---|
| Auto lock |
By Shift from park |
| By Speed, By Shift from park or Off |
Main body ECU (multiplex network body ECU) |
|
Auto unlock | By Shift to park |
| By Shift to park, By Driver Door or Off |
Main body ECU (multiplex network body ECU) |
READ NEXT:
Initialization
INITIALIZATION BACK DOOR LOCK (a) When the auxiliary battery is reconnected:
If the back door is locked and therefore cannot be opened, it is necessary to unlock the back door using the door control
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE NOTICE: If the main body ECU (multiplex network body ECU) is replaced, refer to the Registration.*
for HEV Model: Click here
for Gasoline Model: Click here
*: w/
Terminals Of Ecu
TERMINALS OF ECU CHECK POWER DISTRIBUTION BOX ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
(a) Remove the main body ECU (multiplex network body ECU) from the power distribution box assem
SEE MORE:
GNSS Antenna Circuit Short to Ground (B154711,B154713)
DESCRIPTION
These DTCs are stored when the radio and display receiver assembly
detects an open or short in GNSS antenna assembly.
DTC No.
Detection Item
DTC Detection Condition
Trouble Area
DTC Output from
Priority
VEHICLE CONTROL HISTORY (RoB)
VEHICLE CONTROL HISTORY (RoB)
DESCRIPTION
Vehicle Control History (RoB) is a function that captures and stores
ECU data when triggered by specific vehicle behavior.
If the customer states that the engine stalled or will not start, it
may be possible to diagnose the cause of the malfu
