Toyota Corolla Cross: Odometer and trip meter display
■ Changing the display
Press the display change button until the desired item is displayed.
.png)
■ Display items
- Odometer
Displays the total distance the vehicle has been driven.
- Trip meter A/Trip meter B
Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and display different distances independently.
To reset, display the desired trip meter and press and hold the display change button.
Changing the instrument panel light brightness
The brightness of the instrument panel lights can be adjusted.
.png)
- Brighter
- Darker
■Instrument panel light brightness adjustment
The brightness of the instrument panel lights can be adjusted separately for when the tail lights are on and off.
Adjusting the clock
■ The clocks can be adjusted on the audio system screen.
Refer to "MULTIMEDIA OWNER'S MANUAL".
READ NEXT:
Display and menu icons
■ Display
Driving support system status
display area
Displays an image when the following
systems are operating and a
menu icon other than is
selected:
LTA (Lane Tracing Assist)
LDA (Lane D
Changing the meter display
The multi-information display is
operated using the meter control switches.
: Select menu icons
: Change displayed
content, scroll up/down the
screen and move the cursor
up/down
Press: Enter/
SEE MORE:
Emission inspection and maintenance
(I/M) programs
Some states have vehicle
emission inspection programs
which include OBD
(On Board Diagnostics)
checks. The OBD system
monitors the operation of
the emission control system.
If the malfunction indicator
lamp comes on
The OBD system determines
that a problem exists somewhere
in the emission control
sy
Battery Monitor Module General Electrical Failure (P058A01)
DESCRIPTION
The battery state sensor assembly detects the voltage, current and temperature
of the auxiliary battery. The auxiliary battery state sensor assembly calculates
State of Charge (SOC) based on the voltage and current of the auxiliary battery
and sends it to the ECM. Based on the sig
