Toyota Corolla Cross: Mass Air Flow Meter
Toyota Corolla Cross (2022-2025) Service Manual / Engine & Hybrid System / M20a-fxs (engine Control) / Mass Air Flow Meter
READ NEXT:
On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE
1. INSPECT MASS AIR FLOW METER SUB-ASSEMBLY HINT: Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.
Click here (a) Read the
Removal
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 MASS AIR FLOW METER SUB-ASSEMBLY
22204
- -
The necess
Inspection
INSPECTION PROCEDURE 1. INSPECT MASS AIR FLOW METER SUB-ASSEMBLY
(a) Perform a visual check for any foreign matter on the intake air temperature sensor (thermistor) of the mass air flow meter su
SEE MORE:
Engine Coolant Temperature Sensor 1 Circuit Short to Battery or Open (P011515)
DESCRIPTION Refer to DTC P011511. Click here
HINT: When DTC P011515 is stored, the ECM enters fail-safe mode. During fail-safe mode, the engine coolant temperature is estimated to be 80°C (176°F) by the ECM. Fail-safe mode continues until a pass condition is detected.
DTC No. Detection
Inspection
INSPECTION
PROCEDURE
1. INSPECT REAR SPEAKER ASSEMBLY LH (w/o Stereo Component Amplifier)
(a) With the rear speaker assembly LH installed, check that there
is no looseness or other abnormalities.
(b) Check that there is no foreign matter in the rear speaker assembly
LH, no tears on the rear
© 2020-2025 Copyright www.tcorollacross.com
