DESCRIPTION
These DTCs are stored if there is a malfunction in the CAN communication system connected to the clearance warning ECU assembly.
HINT:
If CAN communication system DTCs are stored, they may also be stored in other systems.
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
---|---|---|---|
U010087 |
Lost Communication with ECM/PCM "A" Missing Message |
The clearance warning ECU assembly is unable to receive data from the ECM for 5.12 seconds or more |
CAN communication system |
U012687 |
Lost Communication with Steering Angle Sensor Module Missing Message |
The clearance warning ECU assembly is unable to receive data from the steering sensor for 5.04 seconds or more |
CAN communication system |
U012987 |
Lost Communication with Brake System Control Module Missing Message |
The clearance warning ECU assembly is unable to receive data from the skid control ECU for 5 seconds or more |
CAN communication system |
U014087 |
Lost Communication with Body Control Module Missing Message |
The clearance warning ECU assembly is unable to receive data from the main body ECU (multiplex network body ECU) for 5 seconds or more |
CAN communication system |
U015587 |
Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message |
The clearance warning ECU assembly is unable to receive data from the combination meter assembly for 5 seconds or more |
CAN communication system |
U016487 |
Lost Communication with HVAC Control Module Missing Message |
The clearance warning ECU assembly is unable to receive data from the air conditioning amplifier assembly for 5 seconds or more |
CAN communication system |
U023387 |
Lost Communication with Side Obstacle Detection Control Module "B" Missing Message |
The clearance warning ECU assembly is unable to receive data from the blind spot monitor sensor LH (B) for 5 seconds or more |
CAN communication system |
U029387 |
Lost Communication with Hybrid/EV Powertrain Control Module Missing Message |
Lost communication with hybrid vehicle control ECU |
CAN communication system |
U110387 |
Lost Communication with Stop and Start Control Module Missing Message |
No communication between the engine stop and start ECU and the clearance warning ECU assembly for 5 second. |
CAN communication system |
PROCEDURE
1. |
CLEAR DTC |
(a) Clear the DTCs.
Body Electrical > Clearance Warning > Clear DTCs
|
2. |
CHECK FOR DTC |
(a) Check for DTCs.
Body Electrical > Clearance Warning > Trouble Codes
Result |
Proceed to |
---|---|
U010087, U012687, U012987, U014087, U015587, U016487, U023387, U029387 or U110387 is output |
A |
DTCs are not output |
B |
None of the above conditions are met |
C |
A |
GO TO CAN COMMUNICATION SYSTEM
|
B |
USE SIMULATION METHOD TO CHECK |
C |
GO TO DTC CHART |