Toyota Corolla Cross: Installation

Toyota Corolla Cross (2022-2025) Service Manual / Vehicle Interior / Seat Belt / Rear Seat Inner Belt Assembly (for Lh Side) / Installation

INSTALLATION

CAUTION / NOTICE / HINT

COMPONENTS (INSTALLATION)

Procedure		Part Name Code
1	REAR SEAT INNER WITH CENTER BELT ASSEMBLY	73480		-	-
2	REAR SEAT CUSHION LOCK HOOK	72693	-	-	-
3	BENCH TYPE REAR SEAT CUSHION ASSEMBLY	-		-	-
4	REAR CENTER SEAT OUTER BELT ASSEMBLY	73350C	-	-	-

*A	for Gasoline Model	*B	for HEV Model
	Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": Nm (kgfcm, ft.*lbf)	●	Non-reusable part

PROCEDURE

1. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY

Protruding Part

(1) Install the rear seat inner assembly with the bolt.

Torque:

42 N·m {428 kgf·cm, 31 ft·lbf}

NOTICE:

Do not allow the anchor part of the rear seat inner belt assembly to overlap the protruding parts of the vehicle body.

(2) Engage the wire harness clamp.

(3) Connect the connector.

2. INSTALL REAR SEAT CUSHION LOCK HOOK

3. INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY

for Gasoline Model:
Click here
for HEV Model:
Click here

4. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY

SEE MORE:

Check For Intermittent Problems

CHECK FOR INTERMITTENT PROBLEMS NOTICE: If the vehicle or vehicle controls are operated (for example, during initial inspection when the vehicle is brought in for repair) before vehicle control history (RoB) has been read out and saved, the vehicle control history (RoB) information could be lo

Cooling System

On-vehicle InspectionON-VEHICLE INSPECTION PROCEDURE 1. INSPECT FOR COOLANT LEAK (for Engine) CAUTION: When engine assembly and radiator assembly are hot, do not remove the radiator cap sub-assembly. Fluid and steam may spray out due to high pressure, possibly resulting in burns.

Toyota Corolla Cross: Installation

READ NEXT:

Rear Seat Inner Belt Assembly (for Rh Side)

Removal

Inspection

SEE MORE:

Check For Intermittent Problems

Cooling System