Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: Installation

Toyota Corolla Cross (2022-2024) Service Manual / Vehicle Exterior / Wiper / Washer / Washer Nozzle (for Front Side) / Installation

INSTALLATION

CAUTION / NOTICE / HINT

COMPONENTS (INSTALLATION)

Procedure

Part Name Code

1

INSTALL WASHER NOZZLE SUB-ASSEMBLY

85035

-

-

-

2

INSPECT WASHER NOZZLE SUB-ASSEMBLY

85035

-

-

3

ADJUST WASHER NOZZLE SUB-ASSEMBLY

85035

-

-

●

Non-reusable part

-

-

PROCEDURE

1. INSTALL WASHER NOZZLE SUB-ASSEMBLY

2. INSPECT WASHER NOZZLE SUB-ASSEMBLY

Click here

3. ADJUST WASHER NOZZLE SUB-ASSEMBLY

Click here

    READ NEXT:

     Washer Nozzle (for Rear Side)

    On-vehicle InspectionON-VEHICLE INSPECTION PROCEDURE 1. INSPECT REAR WASHER NOZZLE (a) Operate the rear washer nozzle and check the position that the washer fluid contacts the back door glass. Stand

     Wiper And Washer System

     Precaution

    PRECAUTION PRECAUTION FOR WASHER NOZZLE ADJUSTMENT (a) Do not clean or adjust the washer nozzle with a safety pin, etc. because: (1) The washer nozzle tip is made of resin and may be damaged. (2) Ad

    SEE MORE:

     Left Side Restraints Sensor 2 Signal Above Allowable Range (B009285)

    DESCRIPTION DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Test Mode / Check Mode B009285 Left Side Restraints Sensor 2 Signal Above Allowable Range One of the following conditions is met: No. 1 side airbag sensor LH malfun

     Throttle Actuator "A" Control System Actuator Stuck Open (P211172,P211173)

    DESCRIPTION The throttle actuator is operated by the ECM and opens and closes the throttle valve using gears. The opening angle of the throttle valve is detected by the throttle position sensor, which is built into the throttle body with motor assembly. The throttle position sensor provides feedback

    © 2020-2024 Copyright www.tcorollacross.com