Toyota Corolla Cross: Freeze Frame Data
FREEZE FRAME DATA
FREEZE FRAME DATA
(a) Whenever a lighting system (w/ AFS) DTC is stored, the headlight ECU sub-assembly or forward recognition camera stores the current vehicle state as freeze frame data.
CHECK FREEZE FRAME DATA
(a) Enter the following menus:
(1) Body Electrical / Headlight Control / Trouble Codes.
Body Electrical > Headlight Control > Trouble Codes(2) Body Electrical / Headlight Control (Sub) / Trouble Codes.
Body Electrical > Headlight Control (Sub) > Trouble Codes(b) Select a DTC to display its freeze frame data.
Body Electrical > Headlight Control|
Tester Display | Measurement Item |
Range | Normal Condition |
Diagnostic Note |
|---|---|---|---|---|
|
Total Distance Traveled |
- | - |
- | Not use |
|
Total Distance Traveled - Unit |
- | - |
- | Not use |
|
ECU Power Source Voltage |
Headlight ECU sub-assembly LH +B power supply voltage value |
0.00 to 19.75 V | 11.00 to 14.00 V |
- |
| IG Voltage |
Headlight ECU sub-assembly LH IG power supply voltage value |
0.00 to 19.75 V | 11.00 to 14.00 V |
- |
| FR Wheel Speed |
Front right wheel speed |
0 to 260 km/h (162 mph) |
Condition can be displayed |
- |
| FL Wheel Speed |
Front left wheel speed |
0 to 260 km/h (162 mph) |
Condition can be displayed |
- |
| Vehicle Speed |
Vehicle speed | 0 to 260 km/h (162 mph) |
Condition can be displayed |
- |
| Vehicle Acceleration |
Vehicle acceleration | -445 to 446 m/s2 |
Condition can be displayed |
- |
| Steering Angle Value After Calibration |
Steering sensor signal value |
-384.0 to 382.5 deg | Changes according to the operation of the steering wheel | |
| Front Height Sensor Power Supply Voltage |
- | - |
- | - |
|
Rear Height Sensor Power Supply Voltage |
Rear height control sensor sub-assembly LH power supply value |
0 to 5 V | 4.61 to 5.00 V |
- |
| Front Height Sensor Vehicle Height Value |
- | - |
- | - |
|
Rear Height Sensor Vehicle Height Value |
Rear height control sensor sub-assembly LH height value |
-128 to 127 mm | Condition can be displayed |
Value changes according to vehicle height |
|
Vehicle Running Direction |
Vehicle running condition |
Backward or Forward | Backward: Shift lever in R or N Forward: Shift lever not in R or N |
- |
| Powertrain Status |
Ready signal | OFF or ON |
OFF: Hybrid control system not ready ON: Hybrid control system ready |
- |
| AFS Function |
Adaptive high beam system swivel function setting |
Valid or Invalid | Valid: Adaptive high beam system swivel function valid Invalid: Adaptive high beam system swivel function invalid |
- |
| Daytime Running Light |
Daytime running light LH and daytime light LH state |
OFF or ON | OFF: Daytime running light LH and daytime light LH off ON: Daytime running light LH and daytime light LH on |
- |
| Clearance Light (+ Front Side Marker Light) |
Clearance light LH state |
OFF or ON | OFF: Clearance light LH off ON: Clearance light LH on |
- |
| Low Beam |
Low beam headlight state |
OFF or ON | OFF: Low beam headlight LH off ON: Low beam headlight LH on |
- |
| Cornering Light/Front Side Illuminate Light |
Parking light LH/front side illuminate light LH state |
OFF or ON | OFF: Parking light LH/front side illuminate light LH off ON: Parking light LH/front side illuminate light LH on |
|
| Cornering Light/Front Side Illuminate Light (Dim) |
Parking light LH/front side illuminate light LH dimmer state (Dim) |
OFF or ON | OFF: Parking light LH/front side illuminate light LH (Dim) off ON: Parking light LH/front side illuminate light LH (Dim) on |
|
|
Tester Display | Measurement Item |
Range | Normal Condition |
Diagnostic Note |
|---|---|---|---|---|
|
Total Distance Traveled |
- | - |
- | Not use |
|
Total Distance Traveled - Unit |
- | - |
- | Not use |
|
ECU Power Source Voltage |
Headlight ECU sub-assembly RH +B power supply voltage value |
0.00 to 19.75 V | 11.00 to 14.00 V |
- |
| IG Voltage |
Headlight ECU sub-assembly RH IG power supply voltage value |
0.00 to 19.75 V | 11.00 to 14.00 V |
- |
| Daytime Running Light |
Daytime running light RH and daytime light RH state |
OFF or ON | OFF: Daytime running light RH and daytime light RH off ON: Daytime running light RH and daytime light RH on |
- |
| Clearance Light (+ Front Side Marker Light) |
Clearance light RH state |
OFF or ON | OFF: Clearance light RH off ON: Clearance light RH on |
- |
| Low Beam |
Low beam headlight state |
OFF or ON | OFF: Low beam headlight RH off ON: Low beam headlight RH on |
- |
| Cornering Light/Front Side Illuminate Light |
Parking light RH/front side illuminate light RH state |
OFF or ON | OFF: Parking light RH/front side illuminate light RH off ON: Parking light RH/front side illuminate light RH on |
|
| Cornering Light/Front Side Illuminate Light (Dim) |
Parking light RH/front side illuminate light RH dimmer state (Dim) |
OFF or ON | OFF: Parking light RH/front side illuminate light RH (Dim) off ON: Parking light RH/front side illuminate light RH (Dim) on |
|
CLEAR FREEZE FRAME DATA
NOTICE:
Clearing the DTCs will also clear the freeze frame data.
(a) Enter the following menus:
(1) Body Electrical / Headlight Control / Clear DTCs.
Body Electrical > Headlight Control > Clear DTCs(2) Body Electrical / Headlight Control (Sub) / Clear DTCs.
Body Electrical > Headlight Control (Sub) > Clear DTCsREAD NEXT:
Data List / Active Test
DATA LIST / ACTIVE TEST DATA LIST NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a p
Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART Lighting System
DTC No. Detection Item
Link B124400
Light Sensor Circuit Malfunction
B241087 Swivel Motor LH Missing Message
VEHICLE CONTROL HISTORY (RoB)
VEHICLE CONTROL HISTORY (RoB) CHECK VEHICLE CONTROL HISTORY
HINT:
The vehicle control history data stores the history of the reject function and system protection operations.
The number of occur
SEE MORE:
On-vehicle Inspection
ON-VEHICLE INSPECTION CAUTION / NOTICE / HINT
CAUTION:
To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.
To prevent burns, do not remove the oil pressure and temperature sensor while the engine is hot.
PROCED
System Diagram
SYSTEM DIAGRAM
HINT:
See the layout drawing to confirm the locations and tightening torque
of flexible hoses and brake lines.
*A
for HEV Model
-
-
*1
Brake Master Cylinder Sub-assembly
*2
Brake Boost
