Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: Data List / Active Test

DATA LIST / ACTIVE TEST

DATA LIST

NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

HINT:

Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

(a) Read the Data List according to the display on the GTS.

Body Electrical > Main Body > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Auto High Beam Main Switch

Auto high beam switch signal

OFF or ON

OFF: Auto high beam switch not pressed

ON: Auto high beam switch pressed

-

Light Control Switch (HEAD)

Light control switch HEAD position signal

OFF or ON

OFF: Light control switch not in HEAD position

ON: Light control switch in HEAD position

-

Insolation Amount of Solar Sensor RH

Solar sensor RH condition

0 to 51100 or SensorFail

Condition can be displayed

-

Insolation Amount of Solar Sensor LH

Solar sensor LH condition

0 to 51100 or SensorFail

Condition can be displayed

-

Light Sensor Illuminance

Light control sensor illuminance

0 to 8191 or SensorFail

Value is output according to ambient light level

The displayed value is "0" when no light is detected.

AHS Function

AFS (adaptive front-lighting system) or adaptive high beam system control function

Not Available or Available

Not Available: AFS (adaptive front-lighting system) or adaptive high beam system control unavailable

Available: AFS (adaptive front-lighting system) or adaptive high beam system control valid

Although the item is displayed on the GTS, it is not applicable to this vehicle.

High Beam Headlights (By AHS ECU)

AFS (adaptive front-lighting system) or adaptive high beam system high beam operation status

Light OFF or Light ON

Light OFF: AFS (adaptive front-lighting system) or adaptive high beam system high beam off

Light ON: AFS (adaptive front-lighting system) or adaptive high beam system high beam on

Although the item is displayed on the GTS, it is not applicable to this vehicle.

Light Sensor Connection History

Light control sensor connection status

Without or With

Without: Automatic light control sensor has not been connected

With: Automatic light control sensor connected or has been connected

-

Headlight ECU Function

ECU which controls the lighting system

Not Available or Available

Not Available: Headlight ECU system control unavailable

Available: Headlight ECU system control valid

-

LDM ECU Function

Automatic high beam sensor current state

Not Available or Available

Not Available: LED driver module ECU system control unavailable

Available: LED driver module ECU system control valid

-

Automatic High Beam Headlights Sensor Detection Status

Automatic high beam sensor state past 1

Undetected, N/A, No sens, Headlight, Taillight, Speed, Daytime, Village, Other sens, Change, Out of aim, SAE Mod, Aim adjust or LIN Err

Condition can be displayed*

-

IGR Power

Ignition switch ON signal

OFF or ON

OFF: Ignition switch off

ON: Ignition switch ON

-

HINT:

*: The details of each value of the Range are as follows:

Display Value

Condition

Control Condition

Diagnostic Note

Undetected

Automatic high beam sensor being initialized

Control suspended (low beam headlights illuminated)

-

N/A

Automatic high beam sensor temporarily disabled due to high temperature, unclear image (due to dirt, fog, etc.), etc.

Control suspended (previous beam setting maintained)

-

No sens

No lights detected and vehicle speed below operation speed

High beam headlights illuminated

Only when vehicle speed within operation speed range

Headlight

Headlights of oncoming vehicle, etc. detected

Low beam headlights illuminated

Only when vehicle speed within operation speed range

Taillight

Taillights preceding vehicle, etc. detected

Low beam headlights illuminated

Only when vehicle speed within operation speed range

Speed

No lights detected and vehicle speed below operation speed

Low beam headlights illuminated

-

Daytime

Bright light detected

Low beam headlights illuminated

-

Village

Streetlights, etc. detected

Low beam headlights illuminated

Only when vehicle speed within operation speed range

Other sens

Not applicable

-

-

Change

Changing between low beams and high beams

Changing between low beams and high beams

Only when vehicle speed within operation speed range

Out of aim

Not applicable

-

-

SAE Mod

Not applicable

-

-

Aim adjust

Not applicable

-

-

LIN Err

Not applicable

-

-

Body Electrical > Headlight Control > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Total Distance Traveled

-

-

-

Not used

Total Distance Traveled - Unit

-

-

-

Not used

ECU Power Source Voltage

Headlight ECU sub-assembly LH ECUB power supply voltage value

0.00 to 19.75 V

11.00 to 14.00 V

-

IG Voltage

Headlight ECU sub-assembly LH IGR power supply voltage value

0.00 to 19.75 V

11.00 to 14.00 V

-

FR Wheel Speed

Front right wheel speed

0.00 to 260.00 km/h (162.00 mph)

Condition can be displayed

-

FL Wheel Speed

Front left wheel speed

0.00 to 260.00 km/h (162.00 mph)

Condition can be displayed

-

Vehicle Speed

Vehicle speed

0.00 to 260.00 km/h (162.00 mph)

Condition can be displayed

-

Vehicle Acceleration

Vehicle speed

-445.64 to 445.63 m/s2

Condition can be displayed

-

Steering Angle Value After Calibration

Steering sensor signal value

-384.0 to 382.5 deg

Changes according to the operation of the steering wheel

Turning left: Increases

Turning right: Decreases

Steering Angle Zero Point Calibration Value

Steering sensor center position

-3072 to 3071 deg

0.0 deg (tires straight ahead)

-

Front Height Sensor Power Supply Voltage

-

-

-

-

Rear Height Sensor Power Supply Voltage

Rear height control sensor sub-assembly LH power supply value

-3072 to 3071 deg

0.0 deg (tires straight ahead)

-

Front Height Sensor Vehicle Height Value

-

-

-

-

Rear Height Sensor Vehicle Height Value

Rear height control sensor sub-assembly LH height value

-128 to 127 mm

Condition can be displayed

Value changes according to vehicle height

Vehicle Running Direction

Traveling direction

Backward or Forward

Backward: Shift lever in R or N

Forward: Shift lever not in R or N

-

Powertrain Status

Ready signal

OFF or ON

OFF: Hybrid control system not ready

ON: Hybrid control system ready

-

BIN1 Positive Terminal Rank

BIN1 positive terminal rank

Determine, Rank A, Rank B, Rank C, Rank D, Rank E, or Malfunction

Condition can be displayed

-

BIN2 Positive Terminal Rank

BIN2 positive terminal rank

Determine, Rank A, Rank B, Rank C, Rank D, Rank E, or Malfunction

Condition can be displayed

-

Rear Vehicle Height Calibration Value

Rear height control sensor sub-assembly LH signal value

0 to 1023

Condition can be displayed

-

Rear Vehicle Height Initialization Determined Result

Rear height adjustment range

Invalid or Valid

Invalid: Rear height control sensor sub-assembly LH value out of normal range

Valid: Rear height control sensor sub-assembly LH value within normal range

-

Initialization Count

Number of times initialization performed

0 to 255

Number of times initialization performed

-

AFS Function

Adaptive high beam system swivel function setting

Invalid or Valid

Customize setting displayed

-

Headlight Leveling Indicator Display

"Headlight System Uninitialized Visit Your Dealer" warning message is display state

OFF or ON

OFF: warning message is not displayed

ON: warning message is displayed

-

Headlight Leveling Initialize Incomplete Display

"Headlight Leveling System Uninitialized" warning message is display state

OFF or ON

OFF: warning message is not displayed

ON: warning message is displayed

-

AFS Indicator (Malfunction) Display

"Headlight System Malfunction Visit Your Dealer" warning message is display state

OFF or ON

OFF: warning message is not displayed

ON: warning message is displayed

-

Headlight System Malfunction Display

"Headlight System Malfunction Visit Your Dealer" warning message is display state

OFF or ON

OFF: warning message is not displayed

ON: warning message is displayed

-

Daytime Running Light

Daytime running light LH and daytime light LH state

OFF or ON

OFF: Daytime running light LH and daytime light LH off

ON: Daytime running light LH and daytime light LH on

-

Clearance Light (+ Front Side Marker Light)

Parking light LH and side maker light LH state

OFF or ON

OFF: Clearance light LH and side maker light LH off

ON: Clearance light LH and side maker light LH on

-

Low Beam

Low beam headlight state

OFF or ON

OFF: Low beam headlight off

ON: Low beam headlight on

-

Cornering Light/Front Side Illuminate Light

Cornering light LH/front side illuminate light LH state

OFF or ON

OFF: Cornering light LH/front side illuminate light LH off

ON: Cornering light LH/front side illuminate light LH on

  • This item can be used when the function is available
  • This item is not used when the function is unavailable

Cornering Light/Front Side Illuminate Light (Dim)

Cornering light LH/front side illuminate light LH dimmer state (Dim)

OFF or ON

OFF: Cornering light LH/front side illuminate light LH (Dim) off

ON: Cornering light LH/front side illuminate light LH (Dim) on

  • This item can be used when the function is available
  • This item is not used when the function is unavailable
Body Electrical > Headlight Control (Sub) > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Total Distance Traveled

-

-

-

Not used

Total Distance Traveled - Unit

-

-

-

Not used

ECU Power Source Voltage

Headlight ECU sub-assembly RH IG power supply voltage value

0.00 to 19.75 V

11.00 to 14.00 V

-

IG Voltage

Headlight ECU sub-assembly RH IG power supply voltage value

0.00 to 19.75 V

11.00 to 14.00 V

-

BIN1 Positive Terminal Rank

BIN1 positive terminal rank

Determine, Rank A, Rank B, Rank C, Rank D, Rank E, or Malfunction

Condition can be displayed

-

BIN2 Positive Terminal Rank

BIN2 positive terminal rank

Determine, Rank A, Rank B, Rank C, Rank D, Rank E, or Malfunction

Condition can be displayed

-

Daytime Running Light

Daytime running light RH and daytime light RH state

OFF or ON

OFF: Daytime running light RH and daytime light RH off

ON: Daytime running light RH and daytime light RH on

-

Clearance Light (+ Front Side Marker Light)

Parking light RH and side maker light RH state

OFF or ON

OFF: Clearance light RH and side maker light RH off

ON: Clearance light RH and side maker light RH on

-

Low Beam

Low beam headlight state

OFF or ON

OFF: Low beam headlight off

ON: Low beam headlight on

-

Cornering Light/Front Side Illuminate Light

Cornering light RH/front side illuminate light RH state

OFF or ON

OFF: Cornering light RH/front side illuminate light RH off

ON: Cornering light RH/front side illuminate light RH on

  • This item can be used when the function is available
  • This item is not used when the function is unavailable

Cornering Light/Front Side Illuminate Light (Dim)

Cornering light RH/front side illuminate light RH state (Dim)

OFF or ON

OFF: Cornering light RH/front side illuminate light RH (Dim) off

ON: Cornering light RH/front side illuminate light RH (Dim) on

  • This item can be used when the function is available
  • This item is not used when the function is unavailable
Body Electrical > Combination Meter > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Hazard Flasher Switch

Hazard warning signal switch signal

OFF or ON

OFF: Hazard warning signal switch off

ON: Hazard warning signal switch on

When the switch is not connected to the combination meter assembly via direct line, the value of the Data List item will not change.

Lane Change Flashing Times Adjust

Condition of the lane change flashing times

OFF, 3, 4, 5, 6 or 7

Customize setting displayed

-

Body Electrical > Power Distribution Box > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Total Distance Traveled

Actual driven distance

0 to 16777215

Roughly the same as the actual driven distance

-

Total Distance Traveled - Unit

Actual driven distance unit

km or mile

Displays the current actual driven distance unit

-

Back-up Light Input Signal

Back-up light input

OFF or ON

OFF: Shift lever in any position other than R

ON: Shift lever in R

*1

Back-up Light Fuse Shut Off Status

Back-up light fuse shut off status

OFF or ON

OFF: Fuse has no shut off history

ON: Fuse has shut off history

*1

Back-up Light Fuse Shut Off Count

Back-up light fuse shut off history

0 to 255

0

*1

Front Fog Light Input Signal

Front fog light input

OFF or ON

OFF: Front fog light is not input

ON: Front fog light is input

*2

Front Fog Light Output Signal

Front fog light output

OFF or ON

OFF: Front fog light is not output

ON: Front fog light is output

*2

Front Fog Light Output Current

Front fog light current

0 to 255 A

Below 0.4 A

Front Fog light current when output is on*2

Front Fog Light Fuse Shut Off Status

Front fog light fuse condition

OFF or ON

OFF: Front fog light fuse not shut off

ON: Front fog light fuse shut off

*2

Front Fog Light Fuse Shut Off Count

Front fog light fuse shut off count

0 to 255

Front fog light fuse has no shut off count

*2

  • *1: for HEV Model
  • *2: w/ Fog Light
Chassis > Steering Angle Sensor > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Total Distance Traveled

Actual driven distance

0 to 16777215

Roughly the same as the actual driven distance

-

Total Distance Traveled - Unit

Actual driven distance unit

km or mile

Displays the current actual driven distance unit

-

Light OFF Switch

Light control switch DRL OFF position signal

OFF or ON

OFF: Light control switch not in DRL OFF position

ON: Light control switch in DRL OFF position

w/ DRL OFF switch

Auto Light Switch

Light control switch AUTO position signal

OFF or ON

OFF: Light control switch not in AUTO position

ON: Light control switch in AUTO position

-

Head Light Switch (Tail)

Light control switch AUTO position signal

OFF or ON

OFF: Light control switch in neither TAIL nor HEAD position

ON: Light control switch in TAIL or HEAD position

-

Head Light Switch (Head)

Light control switch TAIL position signal

OFF or ON

OFF: Light control switch not in HEAD position

ON: Light control switch in HEAD position

-

High Beam Main Switch

Light control switch HEAD position signal

OFF or ON

OFF: Dimmer switch not in high position

OFF: Dimmer switch not in high position

-

Passing Light Switch

Dimmer switch high flash position (pass) signal

OFF or ON

OFF: Dimmer switch not in high flash position

ON: Dimmer switch in high flash position

-

Auto High Beam Main Switch

-

-

-

Although the item is displayed on the GTS, it is not applicable to the vehicle.

Turn Signal Switch (Right)

Turn signal switch (right turn position) signal

OFF or ON

OFF: Turn signal switch not in right turn position

ON: Turn signal switch in right turn position

-

Turn Signal Switch (Left)

Turn signal switch (left turn position) signal

OFF or ON

OFF: Turn signal switch not in left turn position

ON: Turn signal switch in left turn position

-

Cornering Light/Front Side Illuminate Light Switch

Turn signal switch (full turn) signal

OFF or ON

OFF: Turn signal switch not in left or right turn position

ON: Turn signal switch in left or right full turn position

-

Front Fog Light Switch

Fog light switch front position signal

-

-

-

Rear Fog Light/Bad Weather Switch

-

-

-

Although the item is displayed on the GTS, it is not applicable to the vehicle.

Bad Weather Mode Equipped Info

-

-

-

Although the item is displayed on the GTS, it is not applicable to the vehicle.

ACTIVE TEST

HINT:

Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

(a) Perform the Active Test according to the display on the GTS.

Body Electrical > Main Body > Active Test

Tester Display

Measurement Item

Control Range

Diagnostic Note

Headlight Relay / Light Power Supply Relay

Headlights

OFF or ON

-

High Beam Headlight

High beam headlights

OFF or ON

-

Daytime Running Light

Daytime running lights

OFF or ON

-

Automatic High Beam Switch Light

Auto high beam switch indicator light

OFF or ON

-

Dimmer Signal

Auto dimmer signal

OFF or ON

State where circumference illumination is bright

Rear Fog Light

Rear fog lights

OFF or ON

Although this item is displayed on the GTS, it is not applicable to this vehicle.

Front Fog Light

Front fog lights

OFF or ON

-

Taillight / Clearance Light

Taillights

OFF or ON

-

Body Electrical > Headlight Control > Active Test

Tester Display

Measurement Item

Control Range

Diagnostic Note

Headlight Leveling Indicator Display

"Headlight System Uninitialized Visit Your Dealer" warning message is display state

OFF or ON

-

Headlight Leveling Initialize Incomplete Display

"Headlight Leveling System Uninitialized" warning message is display state

OFF or ON

-

AFS Indicator (Malfunction) Display

"Headlight System Malfunction Visit Your Dealer" warning message is display state

OFF or ON

-

Headlight System Malfunction Display

"Headlight System Malfunction Visit Your Dealer" warning message is display state

OFF or ON

-

Daytime Running Light

Daytime running lights

OFF or ON

-

Clearance Light (+ Front Side Marker Light)

Parking lights and side marker lights

OFF or ON

-

Low Beam

Low beam headlights

OFF or ON

-

Cornering Light/Front Side Illuminate Light

-

OFF or ON

  • This item can be used when the function is available
  • This item is not used when the function is unavailable

Cornering Light/Front Side Illuminate Light (Dim)

-

OFF or ON

  • This item can be used when the function is available
  • This item is not used when the function is unavailable
Body Electrical > Headlight Control (Sub) > Active Test

Tester Display

Measurement Item

Control Range

Diagnostic Note

Daytime Running Light

Daytime running lights

OFF or ON

-

Clearance Light (+ Front Side Marker Light)

Parking lights and side marker lights

OFF or ON

-

Low Beam

Low beam headlights

OFF or ON

-

Cornering Light/Front Side Illuminate Light

-

OFF or ON

  • This item can be used when the function is available
  • This item is not used when the function is unavailable

Cornering Light/Front Side Illuminate Light (Dim)

-

OFF or ON

  • This item can be used when the function is available
  • This item is not used when the function is unavailable
Body Electrical > Combination Meter > Active Test

Tester Display

Measurement Item

Control Range

Diagnostic Note

Automatic High Beam Indicator (Green)

Automatic high beam indicator

OFF or ON

-

    READ NEXT:

     Diagnostic Trouble Code Chart

    DIAGNOSTIC TROUBLE CODE CHART Lighting System DTC No. Detection Item Link B124400 Light Sensor Circuit Malfunction B241087 Swivel Motor LH Missing Message

     VEHICLE CONTROL HISTORY (RoB)

    VEHICLE CONTROL HISTORY (RoB) CHECK VEHICLE CONTROL HISTORY HINT: The vehicle control history data stores the history of the reject function and system protection operations. The number of occur

     Light Sensor Circuit Malfunction (B124400)

    DESCRIPTION The automatic light control sensor detects ambient light. The sensor creates an electrical signal based on the amount of light detected, and sends the signal to the main body ECU (multiple

    SEE MORE:

     Data List / Active Test

    DATA LIST / ACTIVE TEST DATA LIST HINT: Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discover

     Customize Parameters

    CUSTOMIZE PARAMETERS CUSTOMIZE SMART KEY SYSTEM (for Start Function) NOTICE: When the customer requests a change in a function, first make sure that the function can be customized. Record the current settings before customizing. HINT: The following items can be customized. (a) Customi

    © 2020-2024 Copyright www.tcorollacross.com