Toyota Corolla Cross: Freeze Frame Data
FREEZE FRAME DATA
FREEZE FRAME DATA
(a) Enter the following menus.
Powertrain > Engine > Trouble Codes
(b) Select a DTC in order to display its freeze frame data.
(c) Check the freeze frame data recorded with the DTC.
Click here .gif)
READ NEXT:
FAIL-SAFE CHART
If the following DTC is stored, the ECM enters fail-safe mode to allow the vehicle
to be driven temporarily.
Charging System
DTC No.
Fail-safe Operation
DATA LIST / ACTIVE TEST
DATA LIST
(a) According to the display on the GTS, read the Data List.
Click here
ACTIVE TEST
(a) According to the display on the GTS, perform the Active Test.
Click he
DIAGNOSTIC TROUBLE CODE CHART
Charging System
DTC No.
Detection Item
MIL
Warning Indicate
Note
Link
P058A01
SEE MORE:
DESCRIPTION
The skid control ECU (brake actuator assembly) receives stop
light switch assembly signals and uses them to determine whether or not the brakes
are applied.
When the brake pedal is depressed and no signal is received
from the stop light switch assembly, this DTC is output.
OPERATION CHECK
HINT:
This function shows the telematics network status when the DCM (telematics
transceiver) was operated. Use this when no DTC is present but this telematics
system was unable to connect to the call center. This symptom may occur
if cell phone signal strength is ve
