Toyota Corolla Cross: Fail-safe Chart
FAIL-SAFE CHART
If the following DTC is stored, the ECM enters fail-safe mode to allow the vehicle
to be driven temporarily.
Charging System
|
DTC No.
|
Fail-safe Operation
|
Fail-safe Deactivation Condition
|
|
P058A01
P062049
P065C07
P160200
P161A87
P162B87
|
Generator command is fixed.
|
Ignition switch is turned to ON after condition returns to normal.
|
READ NEXT:
DATA LIST / ACTIVE TEST
DATA LIST
(a) According to the display on the GTS, read the Data List.
Click here
ACTIVE TEST
(a) According to the display on the GTS, perform the Active Test.
Click he
DIAGNOSTIC TROUBLE CODE CHART
Charging System
DTC No.
Detection Item
MIL
Warning Indicate
Note
Link
P058A01
ON-VEHICLE INSPECTION
CAUTION / NOTICE / HINT
CAUTION:
To prevent injury due to contact with an operating V-ribbed belt or cooling
fan, keep your hands and clothing away from the V-ribbed bel
SEE MORE:
CHECKING MONITOR STATUS The purpose of the monitor result (mode 06) is to allow access to the results of on-board diagnostic monitoring tests of specific components/systems that are not continuously monitored. Examples are catalysts and evaporative emissions (EVAP) systems.
The monitor result allo
■ Smart key system (if
equipped)
Carry the electronic key to
enable this function.
Unlocks all the doors
The doors cannot be unlocked for 3
seconds after the doors are locked.
Locks all the doors
Check that the door is securely
locked.
■Luggage compartment light
The luggage compartment
