Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: Fail-safe Chart

FAIL-SAFE CHART

FAIL-SAFE FUNCTION

(a) If a malfunction is detected in the parking support brake system, the warning message "PKSB Malfunction Visit Your Dealer" or "PKSB Unavailable" is displayed on the multi-information display, the PKSB OFF indicator light blinks and the parking support brake system control is prohibited as necessary.

(b) If the clearance warning ECU assembly judges that there is foreign matter on an ultrasonic sensor or detection of objects is not possible in severe weather such as snow, the warning message "PKSB Unavailable" is displayed, the PKSB OFF indicator light blinks and control is canceled. The warning message "PKSB Unavailable" is temporarily displayed and turns off. The PKSB OFF indicator light blinks to inform the driver of the malfunction. When detection of an obstacle is possible, the PKSB OFF indicator turns off and the parking support brake system control returns to normal.

    READ NEXT:

     Data List / Active Test

    DATA LIST / ACTIVE TEST DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when decidi

     Diagnostic Trouble Code Chart

    DIAGNOSTIC TROUBLE CODE CHART Parking Support Brake System DTC No. Detection Item Link U010087 Lost Communication with ECM/PCM "A&qu

     VEHICLE CONTROL HISTORY (RoB)

    VEHICLE CONTROL HISTORY (RoB) VEHICLE CONTROL HISTORY (CLEARANCE WARNING) HINT: Part of the control history can be confirmed using the vehicle control history. Click here VEHICLE CONTROL HI

    SEE MORE:

     Dtc Check / Clear

    DTC CHECK / CLEAR DTC CHECK (a) Turn the ignition switch off. (b) Connect the GTS to the DLC3. (c) Turn the ignition switch to ON. (d) Turn the GTS on. (e) Read the DTCs following the prompts on the GTS. Chassis > Brake/EPB > Trouble Codes (f) Check the details of the DTCs. NOTICE:

     Disposal

    DISPOSAL PROCEDURE 1. DISPOSE OF REAR SHOCK ABSORBER ASSEMBLY (a) Extend the piston rod and secure the rear shock absorber assembly at an angle in a vise. (b) Using a hacksaw, slowly make a hole at the position indicated by the arrow

    © 2020-2025 Copyright www.tcorollacross.com PT