Toyota Corolla Cross: Engine
READ NEXT:
ON-VEHICLE INSPECTION CAUTION / NOTICE / HINT
CAUTION: To prevent injury due to contact with an operating cooling fan, keep your hands and clothing away from the cooling fans when working in the eng
REMOVAL CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed, installed, or replaced during the e
SEE MORE:
DESCRIPTION Refer to DTC P011511. Click here
HINT: When DTC P011515 is stored, the ECM enters fail-safe mode. During fail-safe mode, the engine coolant temperature is estimated to be 80°C (176°F) by the ECM. Fail-safe mode continues until a pass condition is detected.
DTC No. Detection
INSPECTION PROCEDURE 1. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH
(a) Measure the resistance according to the value(s) in the table below.
*a Component without harness connected
(Front Seat Cushion Heater Assembly LH)
- -
Standard Resistance:
Tester Connectio
On-vehicle Inspection
Engine Coolant Temperature Sensor 1 Circuit Short to Battery or Open (P011515)
