Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: Dynamic radar cruise control

This dynamic radar cruise control detects the presence of vehicles ahead, determines the current vehicle- to-vehicle distance, and operates to maintain a suitable distance from the vehicle ahead. The desired vehicle-to-vehicle distance can be set by operating the vehicle-to-vehicle distance switch.

Use the dynamic radar cruise control only on highways and expressways.

WARNING

■For safe use

  • Driving safely is solely the responsibility of the driver. Do not overly rely on this system, and pay careful attention to the surrounding conditions in order to ensure safe driving.
  • The dynamic radar cruise control provides driving assistance to reduce the driver's burden.

    However, there are limitations to the assistance provided.

Read the following items carefully.

Do not overly rely on this system and always drive carefully.

Conditions under which the system may not operate correctly.

  • Set the speed appropriately according to the speed limit, traffic flow, road conditions, weather conditions, etc. The driver is responsible for confirming the set speed.
  • Even if the system is operating correctly, the condition of a preceding vehicle as recognized by the driver and detected by the system may differ. Therefore, it is necessary for the driver to pay attention, assess risks, and ensure safety. Over-reliance on this system to drive the vehicle safely may lead to an accident resulting in death or serious injury.

■Precautions for the driving assist systems

Observe the following precautions, as there are limitations to the assistance provided by the system. Over-reliance on this system may lead to an accident resulting in death or serious injury.

  • Details of support provided for the driver's vision

The dynamic radar cruise control is only intended to help the driver in determining the distance between the driver's own vehicle and a designated preceding vehicle.

It is not a system which allows for careless or inattentive driving, and is not a system which assists in poor visibility conditions.

The driver must pay attention to their surroundings, even when the vehicle stops.

  • Details of support provided for the driver's judgement

The dynamic radar cruise control determines whether the distance between the driver's own vehicle and a designated preceding vehicle is within a set range. It is not capable of making any other type of judgement. Therefore, it is absolutely necessary for the driver to remain vigilant and to determine whether or not there is a possibility of danger.

  • Details of support provided for the driver's operation

The dynamic radar cruise control does not include functions which will prevent or avoid collisions with vehicles ahead of your vehicle.

Therefore, if there is ever any possibility of danger, the driver must take immediate and direct control of the vehicle and act appropriately in order to ensure safety.

■Situations in which the dynamic radar cruise control should not be used

Do not use the dynamic radar cruise control in the following situations.

As the system will not be able to provide appropriate control, using it may lead to an accident resulting in death or serious injury.

  • Roads where there are pedestrians, cyclists, etc.
  • When driving on a highway or expressway entrance or exit
  • When the approach warning sounds frequently
  • Situations in which the sensors may not operate properly.
  • Situations in which the lane may not be detected

    READ NEXT:

     Basic functions - Dynamic radar cruise control

    Constant speed cruising: When there are no vehicles ahead The vehicle drives at the speed set by the driver. If the set vehicle speed is exceeded while driving down a hill, the set vehicle speed

     Using the dynamic radar cruise control

    Setting the vehicle speed 1. Press the driving assist mode select switch to select dynamic radar cruise control. The dynamic radar cruise control indicator will illuminate. 2. Using the accelerator

     Changing the vehicle-to-vehicle distance

    Each time the switch is pressed, the vehicle-to-vehicle distance setting will change as follows: If a preceding vehicle is detected, the preceding vehicle mark will be displayed. The actual vehicle

    SEE MORE:

     Stop Lamp Relay Actuator Stuck On (C13807E)

    DESCRIPTION When any of the following conditions are met, the skid control ECU (brake actuator assembly) sets the drive output (STPO) ON which operates the stop light control relay (stop light switch assembly) and turns on the stop lights. Illumination Conditions: Pre-collision brake is

     Installation

    INSTALLATION CAUTION / NOTICE / HINT COMPONENTS (INSTALLATION) Procedure Part Name Code 1 ECO RUN VEHICLE CONVERTER ASSEMBLY G92C0B - - 2 FRONT BUMPER ASSEMBLY - - - - 3 CONNECT CABLE TO NEGATIVE AUXILI

    © 2020-2024 Copyright www.tcorollacross.com