Toyota Corolla Cross: Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
Diagnostic Trouble Code Chart
|
DTC No.
|
Detection Item
|
Trouble Area
|
Link
|
|
B102004
|
Central Gateway ECU System Internal Failure
|
Central gateway ECU (network gateway ECU)
|
.gif)
|
|
U117087
|
Lost Communication with Brake System Control Module (ch2) Missing Message
|
- CAN main/branch bus lines or connector
- Brake actuator assembly
- Engine stop and start ECU
- ECM
- No. 9 global CAN junction connector
|
|
READ NEXT:
DESCRIPTION
DTC No.
Detection Item
DTC Detection Condition
Trouble Area
DTC Output from
Priority
Note
B10
DESCRIPTION
DTC No.
Detection Item
DTC Detection Condition
Trouble Area
Note
U117087
Lost Communication with Brake S
DESCRIPTION
Symptom
Trouble Area
Check CAN Communication Connection
CAN main bus line, CAN branch line or connector
Power source circuit of
SEE MORE:
PRECAUTION PRECAUTION FOR WASHER NOZZLE ADJUSTMENT
(a) Do not clean or adjust the washer nozzle with a safety pin, etc. because:
(1) The washer nozzle tip is made of resin and may be damaged. (2) Adjustment is not necessary for this spray type washer nozzle. If it is necessary to change the nozzle
DESCRIPTION
The airbag ECU assembly has a built-in yaw rate and acceleration
sensor and detects the vehicle condition.
These DTCs are stored when the skid control ECU (brake actuator
assembly) receives a malfunction signal from the yaw rate and acceleration sensor
(airbag ECU assembly).
