DATA LIST / ACTIVE TEST
DATA LIST
NOTICE:
In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
HINT:
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
(a) Read the Data List according to the display on the GTS.
Body Electrical > Main Body > Data List
Tester Display | Measurement Item |
Range | Normal Condition |
Diagnostic Note |
---|---|---|---|---|
FL Door Courtesy Switch Status |
Front door courtesy light switch assembly LH signal |
Close or Open | Close: Front door LH closed Open: Front door LH open |
- |
Key Unlock Warning Switch |
Un-lock warning switch |
OFF or ON | OFF: Ignition key not inserted ON: Ignition key inserted |
- |
ACTIVE TEST
HINT:
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
(a) Perform the Active Test according to the display on the GTS.
Body Electrical > Combination Meter > Active Test
Tester Display | Measurement Item |
Control Range | Diagnostic Note |
---|---|---|---|
Buzzer Operation (800Hz, Vol L, W/ Damping) |
Combination meter buzzer
| ON |
- |
Buzzer Operation (800Hz, Vol L, W/O Damping) |
Combination meter buzzer
| ON |
- |
Buzzer Operation (800Hz, Vol S, W/ Damping) |
Combination meter buzzer
| ON |
- |
Buzzer Operation (800Hz, Vol S, W/O Damping) |
Combination meter buzzer
| ON |
- |
Buzzer Operation (1.6kHz, Vol S, W/O Damping) |
Combination meter buzzer
| ON |
- |
Buzzer Operation (2.0kHz, Vol S, W/O Damping) |
Combination meter buzzer
| ON |
- |
Buzzer Operation (2.4kHz, Vol L, W/O Damping) |
Combination meter buzzer
| ON |
- |