Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: Data List / Active Test

DATA LIST / ACTIVE TEST

DATA LIST

NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

HINT:

Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

(a) Read the Data List according to the display on the GTS.

Body Electrical > Blind Spot Monitor "B" > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Total Distance Traveled

Total distance traveled

0 to 16777215

-

-

Total Distance Traveled - Unit

Total Distance Traveled - Unit

km / mile

-

-

Power Supply Voltage

Power supply voltage

0 to 49.95 V

-

-

BSM Outer Mirror Indicator Information (Left)

Status of indicator

Extinction / Lighting / Blinking

-

-

BSM Outer Mirror Indicator Information (Right)

Status of indicator

Extinction / Lighting / Blinking

-

-

LED Outer Mirror Indicator Voltage (Currently Value)

Voltage value of indicator

0 to 25.5 V

-

-

LED Outer Mirror Indicator Current (Currently Value)

Electrical current value of indicator

0 to 255 mA

-

-

Dimmer Signal

Status of dimmer signal

OFF / ON

-

-

Door Open Buzzer Sound Request

Displays the status of the SEA (Safe Exit Assist) function door open buzzer.

OFF / ON (Reject) / ON (Warning)

OFF: The SEA (Safe Exit Assist) function buzzer not sounding

ON (door open cancel): Not used for the SEA (Safe Exit Assist) function

ON (warning): The SEA (Safe Exit Assist) function buzzer sounding

-

Clearance Warning Buzzer Support

Status of clearance warning buzzer support

Pending / Not Support / Support

-

-

RCTA Equipped Information

State of the RCTA equipped information

Without / With

With: RCTA function equipped

Without: RCTA function not equipped

-

FHL Equipped Information

State of the FHL equipped information

Without / With

With: FHL function equipped

Without: FHL function not equipped

-

Outer Mirror Type

Status of outer mirror type

Pending / Optical / Electronic

-

-

Shift Position R

State of the shift position R signal

OFF / ON

OFF: Shift position in any other than R

ON: Shift position in R

-

Vehicle Speed

Vehicle speed signal

-327.68 to 327.67 km/h

Almost same as actual vehicle speed

-

Steering Angle

Steering angle sensor

-3072 to 3070.5 deg

Left turn: Increases

Right turn: Decreases

-

Yaw Rate

Yaw rate sensor

-125.000 to 124.612 deg/s

Turning right: -125.000 to 0 deg/s

Turning left: 0 to 124.612 deg/s

-

Turn Switch

State of the turn signal switch

Left / Right / OFF

Left: Left turn signal switch on

Right: Right turn signal switch on

OFF: Turn signal switch off

-

Steering Wheel Information

State of the steering wheel information

Pending / Left / Right

Pending: Pending

Left: LHD

Right: RHD

-

BSM Main Switch Operation Count (Data 1)

Number of times BSM main switch was operated

0 to 65535

-

-

BSM Main Switch Operation Count (Data 2)

Number of times BSM main switch was operated

0 to 65535

-

-

RCTA Main Switch Operation Count (Data 1)

Number of times RCTA main switch was operated

0 to 65535

-

-

RCTA Main Switch Operation Count (Data 2)

Number of times RCTA main switch was operated

0 to 65535

-

-

L-BSM Mode Operation Count

Number of times L-BSM was operated

0 to 65535

-

-

Outer Mirror Indicator Brightness Setting Operation Count

Number of times outer mirror indicator brightness setting was operated

0 to 65535

-

-

RCTA Buzzer Volume Level Operation Count

Number of times RCTA buzzer volume setting was operated

0 to 65535

-

-

Yaw Rate Sensor Malfunction

State of yaw rate sensor malfunction

No / Yes

-

-

Speed Sensor Malfunction

State of speed sensor malfunction

No / Yes

-

-

Rear Side Radar Sensor Blockage

Displays whether the radar sensor is dirty

No / Yes

-

-

Rear Side Radar Sensor Blockage Level 2

Displays whether the radar sensor is dirty

No / Yes

-

-

Rear Side Radar Sensor Outside Guaranteed Operating Temperature

Displays whether the radar sensor has an abnormal temperature malfunction

No / Yes

-

-

Rear Side Radar Sensor Outside Guaranteed Operating Voltage

Displays whether the radar sensor has an abnormal voltage malfunction

No / Yes

-

-

Rear Side Radar Sensor Beam Axis Not Adjusted

Displays radar sensor beam axis alignment

No / Yes

-

-

Driver User Number

Displays the user number of the driver seat

Indeterminate / User 1 / User 2 / User 3 / Guest

-

-

Driver Classification

Displays the driver classification

Undefined / Normal / Plus Support

-

-

Plus Support Function

Displays the plus support function

Without / With

With: Equipped with plus support function

Without: Not equipped with plus support function

-

SEA Support

Displays the state of safe exit assist system

Not Support / Support

With: Equipped with safe exit assist system function support

Without: Not equipped with safe exit assist system function support

-

D Door Type

Driver door type

Normal / e-Latch

-

-

P Door Type

Front passenger door type

Normal / e-Latch

-

-

RR Door Type

Rear right door type

Normal / e-Latch / PSD

-

-

RL Door Type

Rear left door type

Normal / e-Latch / PSD

-

-

Right PSD Malfunction

PSD right side malfunction

No / Yes

-

-

Left PSD Malfunction

PSD left side malfunction

No / Yes

-

-

e-Latch Malfunction

e-Latch system malfunction

No / Yes

-

-

SEA Function

Safe exit assist system function availability

Valid / Invalid

-

-

SEA Function Set Invalid History

Safe exit assist system function invalid settings availability

Not Recorded / Recorded

-

-

SEA Right Door Control Setting

Safe exit assist system right side door control settings

OFF / ON

-

-

SEA Left Door Control Setting

Safe exit assist system left side door control settings

OFF / ON

-

-

SEA Voice Setting

Safe exit assist system audio settings

OFF / ON

-

-

SEA Detection Sensitivity

Safe exit assist system detection sensitivity

Low / Middle / High

-

-

SEA Prior Warning Setting (Guest)

Status of safe exit assist system advanced warning settings (guest)

OFF / ON

-

-

SEA Prior Warning Setting (Driver3)

Status of safe exit assist system advanced warning settings (driver 3)

OFF / ON

-

-

SEA Prior Warning Setting (Driver2)

Status of safe exit assist system advanced warning settings (driver 2)

OFF / ON

-

-

SEA Prior Warning Setting (Driver1)

Status of safe exit assist system advanced warning settings (driver 1)

OFF / ON

-

-

Outer Mirror Indicator Brightness (Driver1)

Status of outer mirror indicator brightness setting (driver 1)

Dim / Bright

-

-

Outer Mirror Indicator Brightness (Driver2)

Status of outer mirror indicator brightness setting (driver 2)

Dim / Bright

-

-

Outer Mirror Indicator Brightness (Driver3)

Status of outer mirror indicator brightness setting (driver 3)

Dim / Bright

-

-

Outer Mirror Indicator Brightness (Guest)

Status of outer mirror indicator brightness setting (guest)

Dim / Bright

-

-

L-BSM Mode (Guest)

Status of L-BSM mode setting (guest)

OFF / Short / Middle / Long

-

-

L-BSM Mode (Driver3)

Status of L-BSM mode setting (driver 3)

OFF / Short / Middle / Long

-

-

L-BSM Mode (Driver2)

Status of L-BSM mode setting (driver 2)

OFF / Short / Middle / Long

-

-

L-BSM Mode (Driver1)

Status of L-BSM mode setting (driver 1)

OFF / Short / Middle / Long

-

-

L-BSM Mode (Plus Support)

Status of L-BSM mode setting (plus support)

OFF / Short / Middle / Long

-

-

SEA Detection Sensitivity (Guest)

Status of SEA detection sensitivity (guest)

Low / Middle / High

-

-

SEA Detection Sensitivity (Driver3)

Status of SEA detection sensitivity (driver 3)

Low / Middle / High

-

-

SEA Detection Sensitivity (Driver2)

Status of SEA detection sensitivity (driver 2)

Low / Middle / High

-

-

SEA Detection Sensitivity (Driver1)

Status of SEA detection sensitivity (driver 1)

Low / Middle / High

-

-

SEA Detection Sensitivity (Plus Support)

Status of SEA detection sensitivity (plus support)

Low / Middle / High

-

-

RCTA Buzzer Volume Setting (Driver1)

Status of RCTA sound volume setting (driver 1)

Small / Medium / Large

-

-

RCTA Buzzer Volume Setting (Driver2)

Status of RCTA sound volume setting (driver 2)

Small / Medium / Large

-

-

RCTA Buzzer Volume Setting (Driver3)

Status of RCTA sound volume setting (driver 3)

Small / Medium / Large

-

-

RCTA Buzzer Volume Setting (Guest)

Status of RCTA sound volume setting (guest)

Small / Medium / Large

-

-

RCTA Buzzer Volume Setting (Plus Support)

Status of RCTA sound volume setting (plus support)

Small / Medium / Large

-

-

Outer Mirror Indicator Brightness

Status of outer mirror indicator brightness setting

Dim / Bright

Dim: Outer mirror indicator is dimmed

Bright: Outer mirror indicator is not dimmed

-

LED Outer Mirror Indicator Current (Dimmer OFF, Bright)

Electrical current flow to indicator in Bright setting with dimmer OFF

0 to 100 mA

-

-

LED Outer Mirror Indicator Current (Dimmer OFF, Dim)

Electrical current flow to indicator in Dim setting with dimmer OFF

0 to 100 mA

-

-

LED Outer Mirror Indicator Current (Dimmer ON, Bright)

Electrical current flow to indicator in Bright setting with dimmer ON

0 to 100 mA

-

-

LED Outer Mirror Indicator Current (Dimmer ON, Dim)

Electrical current flow to indicator in Dim setting with dimmer ON

0 to 100 mA

-

-

LED Outer Mirror Indicator Blinking Duty Ratio

Duty ratio when indicator blinking

0 to 100 %

-

-

Prior Warning Setting

ON/OFF status of indicator illumination for the SEA (Safe Exit Assist) function when all of the doors are closed

OFF / ON

-

-

L-BSM Mode

Status of L-BSM mode setting

OFF / Short / Middle / Long

-

-

BSM Function

State of the BSM function

Valid / Invalid

-

-

RCTA Function

State of the RCTA function

Valid / Invalid

-

-

Beam Axis Revision Angle

Compensation angle of beam axis

-327.68 to 327.67 deg

-

-

Destination Information

Status of destination information confirmation

Defined / Undefined

Defined: Destination information is confirmed

Undefined: Destination information is not confirmed

-

RCTA Function Set Invalid History

Whether vehicle is equipped with RCTA function

Not Recorded / Recorded

-

-

BSM Function Set Invalid History

Whether vehicle is equipped with BSM function

Not Recorded / Recorded

-

-

Body Electrical > Blind Spot Monitor "A" > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Total Distance Traveled

Total distance traveled

0 to 16777215

-

-

Total Distance Traveled - Unit

Total Distance Traveled - Unit

km / mile

-

-

Power Supply Voltage

Power supply voltage

0 to 49.95 V

Ignition switch ON:

11 to 14 V

-

LED Outer Mirror Indicator Voltage (Currently Value)

Voltage value of indicator

0 to 25.5 V

-

-

LED Outer Mirror Indicator Current (Currently Value)

Electrical current value of indicator

0 to 255 mA

-

-

Dimmer Signal

Status of dimmer signal

OFF / ON

-

-

Buzzer Sound Request

Alarm status of No. 2 clearance warning buzzer

OFF / ON

-

-

Clearance Warning Buzzer Support

Status of clearance warning buzzer support

Pending / Not Support / Support

-

-

RCTA Equipped Information

State of the RCTA equipped information

Without / With

With: RCTA function equipped

Without: RCTA function not equipped

-

FHL Equipped Information

State of the FHL equipped information

Without / With

With: FHL function equipped

Without: FHL function not equipped

-

Outer Mirror Type

Status of outer mirror type

Pending / Optical / Electronic

-

-

Shift Position R

State of the shift position R signal

OFF / ON

OFF: Shift position in any other than R

ON: Shift position in R

-

Vehicle Speed

Vehicle speed signal

-327.68 to 327.67 km/h

Almost same as actual vehicle speed

-

Steering Angle

Steering angle sensor

-3072 to 3070.5 deg

Left turn: Increases

Right turn: Decreases

-

Yaw Rate

Yaw rate sensor

-125.000 to 124.612 deg/s

Turning right: -125.000 to 0 deg/s

Turning left: 0 to 124.612 deg/s

-

Turn Switch

State of the turn signal switch

Left / Right / OFF

Left: Left turn signal switch on

Right: Right turn signal switch on

OFF: Turn signal switch off

-

Steering Wheel Information

State of the steering wheel information

Pending / Left / Right

Pending: Pending

Left: LHD

Right: RHD

-

BSM Main Switch Operation Count (Data 1)

Number of times BSM main switch was operated

0 to 65535

-

-

BSM Main Switch Operation Count (Data 2)

Number of times BSM main switch was operated

0 to 65535

-

-

RCTA Main Switch Operation Count (Data 1)

Number of times RCTA main switch was operated

0 to 65535

-

-

RCTA Main Switch Operation Count (Data 2)

Number of times RCTA main switch was operated

0 to 65535

-

-

Rear Side Radar Sensor Blockage

Displays whether the radar sensor is dirty

No / Yes

-

-

Rear Side Radar Sensor Blockage Level 2

Displays whether the radar sensor is dirty

No / Yes

-

-

Rear Side Radar Sensor Outside Guaranteed Operating Temperature

Displays whether the radar sensor has an abnormal temperature malfunction

No / Yes

-

-

Rear Side Radar Sensor Outside Guaranteed Operating Voltage

Displays whether the radar sensor has an abnormal voltage malfunction

No / Yes

-

-

Rear Side Radar Sensor Beam Axis Not Adjusted

Displays radar sensor beam axis alignment

No / Yes

-

-

SEA Support

Displays the state of safe exit assist system

Not Support / Support

-

-

D Door Type

Driver door type

Normal / e-Latch

-

-

P Door Type

Front passenger door type

Normal / e-Latch

-

-

RR Door Type

Rear right door type

Normal / e-Latch / PSD

-

-

RL Door Type

Rear left door type

Normal / e-Latch / PSD

-

-

SEA Function

Safe exit assist system function availability

Valid / Invalid

-

-

SEA Function Set Invalid History

Safe exit assist system function invalid settings availability

Not Recorded / Recorded

-

-

SEA Detection Sensitivity

Safe exit assist system detection sensitivity

Low / Middle / High

-

-

Outer Mirror Indicator Brightness

Status of outer mirror indicator brightness setting

Dim / Bright

Dim: Outer mirror indicator is dimmed

Bright: Outer mirror indicator is not dimmed

-

LED Outer Mirror Indicator Current (Dimmer OFF, Bright)

Electrical current flow to indicator in Bright setting with dimmer OFF

0 to 100 mA

-

-

LED Outer Mirror Indicator Current (Dimmer OFF, Dim)

Electrical current flow to indicator in Dim setting with dimmer OFF

0 to 100 mA

-

-

LED Outer Mirror Indicator Current (Dimmer ON, Bright)

Electrical current flow to indicator in Bright setting with dimmer ON

0 to 100 mA

-

-

LED Outer Mirror Indicator Current (Dimmer ON, Dim)

Electrical current flow to indicator in Dim setting with dimmer ON

0 to 100 mA

-

-

LED Outer Mirror Indicator Blinking Duty Ratio

Duty ratio when indicator blinking

0 to 100 %

-

-

RCTA Buzzer Volume

Status of RCTA buzzer volume

Small / Middle / Large

-

Although the item is displayed on the GTS, it is not applicable to this vehicle.

L-BSM Mode

Status of L-BSM mode setting

OFF / Short / Middle / Long

-

-

BSM Function

State of the BSM function

Valid / Invalid

-

-

RCTA Function

State of the RCTA function

Valid / Invalid

-

-

Beam Axis Revision Angle

Compensation angle of beam axis

-327.68 to 327.67 deg

-

-

Destination Information

Status of destination information confirmation

Defined / Undefined

Defined: Destination information is confirmed

Undefined: Destination information is not confirmed

-

RCTA Function Set Invalid History

Whether vehicle is equipped with BSM function

Not Recorded / Recorded

-

-

BSM Function Set Invalid History

Whether vehicle is equipped with BSM function

Not Recorded / Recorded

-

-

ACTIVE TEST

HINT:

Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

(a) According to the display on the GTS, perform the Active Test.

Body Electrical > Blind Spot Monitor "B" > Active Test

Tester Display

Measurement Item

Control Range

Diagnostic Note

Door Open Buzzer Sound

Sound the buzzer

OFF or ON

-

Body Electrical > Blind Spot Monitor "A" > Active Test

Tester Display

Measurement Item

Control Range

Diagnostic Note

RCTA Buzzer Sound

RCTA buzzer

Stop or Start

Confirm that the vehicle is stopped and the ignition switch is ON

    READ NEXT:

     Diagnostic Trouble Code Chart

    DIAGNOSTIC TROUBLE CODE CHART Blind Spot Monitor System DTC No. Detection Item Link C1AB411 Outer Mirror Indicator (Module "B"

     VEHICLE CONTROL HISTORY (RoB)

    VEHICLE CONTROL HISTORY (RoB) NOTICE: When checking the vehicle control history, first store the output history and then check the history. CHECK VEHICLE CONTROL HISTORY (a) Following the instru

     Outer Mirror Indicator (Module "B" Side) Circuit Short to Ground (C1AB411)

    DESCRIPTION This DTC is stored when the blind spot monitor sensor LH (B) detects a short to ground in the outer rear view mirror indicator LH. DTC No. Detection Item

    SEE MORE:

     Moon roof

    Use the overhead switches to open and close the moon roof and tilt it up and down. Operating the moon roof ■ Opening and closing Opens the moon roof* The moon roof stops slightly before the fully open position to reduce wind noise. Press the switch again to fully open the moon roof. Closes t

     Utility

    UTILITY HINT: With "All Readiness", you can check whether or not the DTC judgment has been completed by using the GTS You should check "All Readiness" after simulating malfunction symptoms or for validation after finishing repairs. ALL READINESS (a) Clear the

    © 2020-2024 Copyright www.tcorollacross.com