Toyota Corolla Cross: Customize Parameters
CUSTOMIZE PARAMETERS
CUSTOMIZE LIGHTING SYSTEM (INT)
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
HINT:
The following items can be customized.
(a) Customizing using the GTS
(1) Enter the following menus: Customize Setting / Illuminated Entry.
(2) Select the setting by referring to the table below.
Illuminated Entry|
Tester Display | Description |
Default | Setting |
ECU |
|---|---|---|---|---|
| Interior Lights ON when Approached Function |
Lights up the following lights when the map light assembly door linked switch is on the room light assembly switch is set to DOOR, and the electrical key transmitter sub-assembly is brought near the vehicle*1:
| Enable |
$00:Disable,$01:Enable |
Main body ECU (Multiplex network body ECU) |
|
Interior Lights ON when Door Unlocked Function |
Lights up the following lights automatically when the map light assembly door linked switch is on the room light assembly switch is set to DOOR, and the doors are unlocked by an unlock operation:
| Enable |
$00:Disable,$01:Enable |
Main body ECU (Multiplex network body ECU) |
|
Interior Lights ON when IG OFF Function |
Lights up the following lights automatically when the map light assembly door linked switch is on the room assembly) switch is set to DOOR, and the ignition switch is turned from ON or ACC to off:
| Enable |
$00:Disable,$01:Enable |
Main body ECU (Multiplex network body ECU) |
|
Light Control Function |
Dims the following lights when the ignition switch is ON and the shift lever is moved to any position other than P:
| Enable |
$00:Disable,$01:Enable |
Main body ECU (Multiplex network body ECU) |
|
Interior Illumination Light 1 Function |
Function of lighting Interior Illumination. Interior Illumination Light is being interlocked with Inside Foot Light.*2 |
Enable | $00:Disable,$01:Enable |
Main body ECU (Multiplex network body ECU) |
|
Interior Lights Lighting Timer Setting |
Changes the lighting time of the following lights that are operated by the timer function when the DOOR switch of the map light assembly and room light assembly is on |
Normal | $00:Normal,$01:Short,$02:Long |
Main body ECU (Multiplex network body ECU) |
|
Interior Lights ON Function |
Function to set the lighting control of interior lights.
| Enable |
$00:Disable,$01:Enable |
Main body ECU (Multiplex network body ECU) |
- *1: w/ Smart Key System
- *2: for vehicles displaying the Item "Interior Illumination Light 1 Function" on the GTS
- *3: w/ Ambient Illumination Light
(b) Customizing with the multi-display
(1) Turn the ignition switch to ON.
(2) Enter the following menus: MENU / Setup / Vehicle / Vehicle customisation / Lights settings.
(3) Select the setting by referring to the table below.
|
Display | Default |
Content | Setting |
Relevant ECU |
|---|---|---|---|---|
| Interior Lights Auto off Timer |
15 sec. | Changes the lighting time of the following lights that are operated by the timer function when the DOOR switch of the map light assembly and room light assembly is on:
| Off, 7.5 seconds, 15 seconds, 30 seconds |
Main body ECU (Multiplex network body ECU) |
- *1: w/ Ambient Illumination Light
READ NEXT:
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE
NOTICE:
Before replacing the main body ECU (multiplex network body ECU) or certification ECU (smart key ECU assembly)*1, refer to Registration.
*1: w/ Smart Key Syst
Terminals Of Ecu
TERMINALS OF ECU CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND POWER DISTRIBUTION BOX ASSEMBLY
(a) Remove the main body ECU (multiplex network body ECU) from the power distribution box assem
Data List / Active Test
DATA LIST / ACTIVE TEST DATA LIST NOTICE:
In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whethe
SEE MORE:
Removal
REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL)
Procedure Part Name Code
1 REAR CENTER SEAT OUTER BELT ASSEMBLY
73350C -
- -
2 REAR SEATBACK ASSEMBLY RH
-
- -
Procedure Part Name Code
Data List / Active Test
DATA LIST / ACTIVE TEST DATA LIST HINT:
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discover
