Toyota Corolla Cross: Data List / Active Test
DATA LIST / ACTIVE TEST
DATA LIST
NOTICE:
In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
HINT:
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
(a) Enter the following menus: Body Electrical / (desired system) / Data List.
(b) Read the Data List according to the display on the GTS.
Body Electrical > Main Body > Data List|
Tester Display | Measurement Item |
Range | Normal Condition |
Diagnostic Note |
|---|---|---|---|---|
|
FR Door Lock Position Switch Status |
Front door RH unlock detection switch signal |
LOCK or UNLOCK | LOCK: Front door RH locked UNLOCK: Front door RH unlocked |
- |
| FL Door Lock Position Switch Status |
Front door LH unlock detection switch signal |
LOCK or UNLOCK | LOCK: Front door LH locked UNLOCK: Front door LH unlocked |
- |
| RR Door Lock Position Switch Status |
Rear door RH unlock detection switch signal |
LOCK or UNLOCK | LOCK: Rear door RH locked UNLOCK: Rear door RH unlocked |
- |
| RL Door Lock Position Switch Status |
Rear door LH unlock detection switch signal |
LOCK or UNLOCK | LOCK: Rear door LH locked UNLOCK: Rear door LH unlocked |
- |
| Back Door Lock Position Status |
Back door courtesy switch signal |
LOCK or UNLOCK | LOCK: Back door locked UNLOCK: Back door unlocked | |
| FR Door Courtesy Switch Status |
Front door courtesy light switch assembly (RH) signal |
CLOSE or OPEN | CLOSE: Front door RH closed OPEN: Front door RH open |
- |
| FL Door Courtesy Switch Status |
Front door courtesy light switch assembly (LH) signal |
CLOSE or OPEN | CLOSE: Front door LH closed OPEN: Front door LH open |
- |
| RR Door Courtesy Switch Status |
Rear door courtesy light switch assembly (RH) signal |
CLOSE or OPEN | CLOSE: Rear door RH closed OPEN: Rear door RH open |
- |
| RL Door Courtesy Switch Status |
Rear door courtesy light switch assembly (LH) signal |
CLOSE or OPEN | CLOSE: Rear door LH closed OPEN: Rear door LH open |
- |
| Back Door Courtesy Switch Status |
Back door courtesy switch signal |
CLOSE or OPEN | CLOSE: Back door closed OPEN: Back door open |
- |
| IGR Power |
Ignition switch ON signal |
OFF or ON | OFF: Ignition switch off ON: Ignition switch ON |
- |
|
Tester Display | Measurement Item |
Range | Normal Condition |
Diagnostic Note |
|---|---|---|---|---|
|
Panel Light Input Signal |
Panel light input condition |
OFF or ON | OFF: Light control switch not in tail position ON: Light control switch in tail position |
- |
| Panel Light Output Signal |
Panel light output condition |
OFF or ON | OFF: Light control switch not in tail or head position ON: Light control switch in tail or head position |
- |
| Panel Light Output Current |
Panel light current | Min.: 0, Max.: 255 A |
Below 3.2 A | Panel light current when output is on |
|
Panel Light Fuse Shut Off Status |
Panel Light Fuse condition |
OFF or ON | OFF: Fuse not shut off ON: Fuse shut off | - |
|
Panel Light Fuse Shut Off Count |
Panel light fuse shut off history |
Min.: 0, Max.: 255 | Number of fuse shut off displayed |
- |
ACTIVE TEST
HINT:
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
(a) Enter the following menus: Body Electrical / (desired system) / Active Test.
(b) Perform the Active Test according to the display on the GTS.
Body Electrical > Main Body > Active Test|
Tester Display | Measurement Item |
Control Range | Diagnostic Note |
|---|---|---|---|
|
Illuminated Entry System |
Turns on the lights that are controlled by the illuminated entry system*1 |
OFF or ON | Perform the Active Test with DOOR switch in the map light assembly and room light assembly turned on. |
|
Front Footwell Lights | Operation of the following lights:
| OFF or ON |
*2 |
| Relay for Interior Light Auto Cut Function |
DOME CUT relay | OFF or ON |
When performing this Active Test, turn all the interior lights on.
|
- *1: Refer to System Description for the lights that are controlled by the illuminated entry system.
Click here
.gif)
- *2: w/ Ambient Illumination Light
|
Tester Display | Measurement Item |
Control Range | Diagnostic Note |
|---|---|---|---|
|
Start SW Light Power Supply |
Push start switch illumination |
OFF or ON | *1 |
- *1: w/ Smart Key System
READ NEXT:
IG Signal Circuit
DESCRIPTION This circuit detects the ignition switch ON or off condition, and sends it to the main body ECU (multiplex network body ECU). WIRING DIAGRAM
CAUTION / NOTICE / HINT
NOTICE:
Inspec
Front Door Courtesy Switch Circuit
DESCRIPTION The main body ECU (multiplex network body ECU) detects the condition of the front door courtesy light switch assembly. WIRING DIAGRAM
CAUTION / NOTICE / HINT
NOTICE: Before replacing
Rear Door Courtesy Switch Circuit
DESCRIPTION The main body ECU (multiplex network body ECU) detects the condition of the rear door courtesy light switch assembly. WIRING DIAGRAM
CAUTION / NOTICE / HINT
NOTICE: Before replacing t
SEE MORE:
LTA (Lane Tracing Assist)
LTA functions
When driving on a road with
clear lane lines with the
dynamic radar cruise control
operating, lane lines and preceding
and surrounding vehicles
are detected using the
front camera and radar sensor,
and the steering wheel is
operated to maintain the vehicle's
lane position.
No Cool Air Comes Out
DESCRIPTION If warm air blows from the registers regardless of the temperature setting of the air conditioning system, the following factors may be the cause.
Symptom Factor
No cool air comes out
(Blower control is normal)
Compressor with pulley assembly mal
