Toyota Corolla Cross: Cleaning and protecting
READ NEXT:
Perform cleaning in a manner
appropriate to each
component and its material.
Cleaning instructions
Working from top to bottom,
liberally apply water to the
vehicle body, wheel wells and
underside
Perform cleaning in a manner
appropriate to each
component and its material.
Protecting the vehicle
interior
Remove dirt and dust using a
vacuum cleaner. Wipe dirty
surfaces with a cloth dampened
SEE MORE:
DESCRIPTION The hybrid vehicle control ECU compares the IGP signal to the IG control status signal sent from the certification ECU (smart key ECU assembly) to detect a stuck on malfunction of the IGP signal.
HINT: If DTC P253012 is stored, the ignition switch will turn off (READY off).
DTC
INSPECTION PROCEDURE 1. INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection Condition
Specified Condition
O49-3(+) - O49-2(-)
Driver side seat
Cleaning and protecting the
vehicle exterior
IG2 Signal Circuit Short to Auxiliary Battery (P253012)
