Toyota Corolla Cross: Wireless remote control
The keys are equipped with the
following wireless remote control:
Vehicles without a smart key
system
.png)
- Locks the doors
- Unlocks the doors
- Opens the windows*1
- Sounds the alarm
Vehicles with a smart key system
.png)
- Locks the doors
- Unlocks the doors
- Opens the windows*1 and
moon roof*1, 2
- Opens and closes the power
back door*2
- Sounds the alarm
*1: This setting must be customized
at your Toyota dealer.
*2: If equipped
■Panic mode
Vehicles without a smart key system
When
is pressed for longer
than about one second, an alarm
will sound intermittently and the
vehicle lights will flash to deter any
person from trying to break into or
damage your vehicle.
To stop the alarm, press any button
on the wireless remote control.
.png)
Vehicles with a smart key system
When
is pressed for longer
than about one second, an alarm
will sound intermittently and the
vehicle lights will flash to deter any
person from trying to break into or
damage your vehicle.
To stop the alarm, press any button
on the electronic key.
.png)
■Conditions affecting the operation
of the smart key system or
wireless remote control
Vehicles without a smart key system
The wireless remote control function
may not operate normally in the following
situations:
- When the wireless key battery is
depleted
- Near a TV tower, electric power
plant, gas station, radio station,
large display, airport or other facility
that generates strong radio
waves or electrical noise
- When carrying a portable radio,
cellular phone or other wireless
communication devices
- When the wireless key is in contact
with, or is covered by a metallic
object
- When a wireless key (that emits radio waves) is being used nearby
- If window tint with a metallic content
or metallic objects are
attached to the rear window
READ NEXT:
To take out the mechanical key,
slide the release button and take
the key out.
The mechanical key can only be
inserted in one direction, as the
key only has grooves on one
side. If the key cannot be
■ Smart key system (if
equipped)
Carry the electronic key to
enable this function.
Grip the driver's door handle to unlock the door. Holding the driver's door handle for approximately 2 seconds u
SEE MORE:
INSTALLATION CAUTION / NOTICE / HINT COMPONENTS (INSTALLATION)
Procedure Part Name Code
1 BACK DOOR DAMPER STAY LOWER BRACKET
68948
- -
2 BACK DOOR DAMPER STAY UPPER BRACKET
68946
- -
3 BACK DOOR STAY ASSEMBLY
DTC SUMMARY MALFUNCTION DESCRIPTION These DTCs indicate that the current sensor value is abnormal. The cause of this malfunction may be one of the following: Internal inverter malfunction
Inverter with converter assembly internal circuit malfunction
Inverter low-voltage circuit malfunctio