Toyota Corolla Cross: Using a top tether anchorage (for Puerto Rico)
■ Top tether anchorages
Top tether anchorages are provided for each rear seat.
Use top tether anchorages when fixing the top strap.
- Top tether anchorages
- Top strap
■ Fixing the top strap to the top tether anchorages
Install the child restraint system in accordance to the operation manual enclosed with the child restraint system.
Rear outboard seats
1. Adjust the head restraint to the upmost position.
If the head restraint interferes with your child restraint system, and the head restraint can be removed, remove the head restraint.
2. Latch the hook onto the top tether anchorage and tighten the top strap.
Make sure the top strap is securely latched.
When installing the child restraint system with the head restraint being raised, be sure to have the top strap pass underneath the head restraint.
- Hook
- Top strap
Rear center seat
Latch the hook onto the top tether anchorage and tighten the top strap.
Make sure the top strap is securely latched.
- Hook
- Top strap
WARNING
■When installing a child restraint system
Observe the following precautions.
Failure to do so may result in death or serious injury.
- Firmly attach the top strap and make sure that the belt is not twisted.
- Do not attach the top strap to anything other than the top tether anchorages.
- After securing a child restraint system, never adjust the seat.
- Follow all installation instructions provided by the child restraint system manufacturer.
- Outboard rear seats: When installing the child restraint system with the head restraint being raised, after the head restraint has been raised and then the top tether anchorage has been fixed, do not lower the head restraint.
READ NEXT:
Emergency assistance
Safety Connect
Safety Connect is a subscription-based telematics
service that uses Global
Positioning System (GPS)
data and embedded cellular
technology to provide
safety and security features
to subs
System components
Microphone
LED light indicators
"SOS" button
Services
Subscribers have the following
Safety Connect services available:
Automatic Collision Notification*
Helps drivers receive necessary
respo
Subscription
After you have signed the
Telematics Subscription Service
Agreement and are enrolled,
you can begin receiving services.
A variety of subscription terms
are available for purchase. Contact
your Toyota
SEE MORE:
Generator Phase U Current Sensor Signal Bias Level Out of Range / Zero Adjustment Failure (P0E0028,P0E0428,P0E0828)
DTC SUMMARY MALFUNCTION DESCRIPTION These DTCs indicate that the current sensor value is abnormal. The cause of this malfunction may be one of the following: Internal inverter malfunction
Current sensor malfunction
Inverter with converter assembly internal circuit malfunction
DESCRI
Swivel Motor LH Missing Message (B241087,B241187)
DESCRIPTION Each headlight ECU sub-assembly and headlight swivel and leveling motor communicate via LIN communication.
The headlight swivel and leveling motor operates according to power supplied and automatic headlight beam level control signals from its respective headlight ECU sub-assembly and s
