Toyota Corolla Cross: System Diagram
SYSTEM DIAGRAM
READ NEXT:
How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT
HINT:
Use the following procedure to troubleshoot the tire pressure warning system.
Make sure that the wireless door lock control system has exited diagnostic
mode
Operation Check
OPERATION CHECK
CHECK TIRE PRESSURE WARNING SYSTEM FUNCTION
(a) Using the Data List, check that the current tire pressure is normal.
Click here
(1) Slowly reduce the tire pressure of the front
Registration
REGISTRATION
PROCEDURE
1. BEFORE REGISTRATION
NOTICE:
The transmitter ID is written on the tire pressure warning valve and transmitter.
It is not possible to read the transmitter ID after in
SEE MORE:
A/F (O2) Sensor Signal Biased/Stuck Lean Bank 1 Sensor 2 Circuit Current Above Threshold (P227019,P227118)
DESCRIPTION Refer to DTC P003612. Click here
HINT: Although the DTC title say O2 sensor, these DTCs relate to the air fuel ratio sensor (sensor 2).
DTC No. Detection Item
DTC Detection Condition Trouble Area
MIL Note
P227019 A/F (O2) Sensor Signal Biased/Stuck Lea
Inspection
INSPECTION PROCEDURE 1. INSPECT WINDSHIELD WIPER SWITCH ASSEMBLY
(a) Check the resistance.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance: Front Wiper Switch
Tester Connection Condition
Specified Condition
z16-14 (MIST) - z1
© 2020-2024 Copyright www.tcorollacross.com
