Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: System Description

Toyota Corolla Cross (2022-2024) Service Manual / Vehicle Interior / Seat Belt / Seat Belt Warning System / System Description

SYSTEM DESCRIPTION

SEAT BELT WARNING SYSTEM DESCRIPTION

(a) Seat belt warning light operation for driver seat belt:

The seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with the driver seat belt state, vehicle speed, shift lever position and parking brake state.

(b) Seat belt warning light operation for front passenger seat belt:

The seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with whether the front passenger seat is occupied, the front passenger seat belt state, vehicle speed, shift lever position and parking brake state.

(c) Rear seat belt warning light:

The rear seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with the vehicle speed and rear seat belt state.

(d) Front seat belt warning buzzer:

After turning the ignition switch to ON, if the driver seat belt is not fastened within 1.8 seconds, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 1.2 seconds for 6 seconds.

When the vehicle is driven at approximately 20 km/h (12 mph) or more with the front passenger seat occupied and the driver or front passenger seat belt not fastened, the seat belt warning buzzer in the combination meter assembly will sound once.

When 18 seconds have passed after the buzzer sounded, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 1.2 seconds for 6 seconds.

After that, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 0.4 seconds for 100 seconds.

(e) Rear seat belt warning buzzer:

When the vehicle is driven at approximately 20 km/h (12 mph) or more with a rear seat belt not fastened, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 1.2 seconds for 6 seconds.

After that, the seat belt warning buzzer in the combination meter assembly will sound at an interval of 0.4 seconds for 66 seconds.

FUNCTION OF MAIN COMPONENTS

Component

Function

Front seat inner belt assembly LH

Informs the combination meter assembly of the driver seat belt condition (fastened or unfastened).

Front seat inner belt assembly RH

Informs the airbag ECU assembly of the front passenger seat belt condition (fastened or unfastened).
  • Front occupant classification sensor
  • Rear occupant classification sensor

Informs the airbag ECU assembly of the front passenger seat condition (occupied or unoccupied).
  • Rear seat inner belt assembly RH
  • Rear seat inner with center belt assembly LH

Informs the combination meter assembly of each rear seat belt condition (fastened or unfastened).

Rear door courtesy light switch assembly (LH/RH)

Informs the main body ECU (multiplex network body ECU) of the rear door condition (open or closed).

Combination meter assembly
  • Illuminates, blinks or turns off the seat belt warning light.
  • Sounds the seat belt warning buzzer.

Airbag ECU assembly

Sends the front passenger seat belt buckle switch signal and occupant detection signal to the combination meter assembly via CAN communication.

Main body ECU (multiplex network body ECU)

Sends the rear door courtesy switch signal to the combination meter assembly via CAN communication.

Skid control ECU (brake actuator assembly)
  • Sends the parking brake signal to the combination meter assembly via CAN communication.
  • Sends the vehicle speed signal to the combination meter assembly via CAN communication.

Hybrid vehicle control ECU*1

Sends the shift position signal to the combination meter assembly via CAN communication.

ECM*2
  • *1: for HEV Model
  • *2: for Gasoline Model

    READ NEXT:

     How To Proceed With Troubleshooting

    CAUTION / NOTICE / HINT HINT: Use the following procedure to troubleshoot the seat belt warning system. *: Use the GTS. PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP

     Customize Parameters

    CUSTOMIZE PARAMETERS NOTICE: When the customer requests a change in a function, first make sure that the function can be customized. Be sure to make a note of the current settings before cu

     Problem Symptoms Table

    PROBLEM SYMPTOMS TABLE NOTICE: When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the info

    SEE MORE:

     Removal

    REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL) Procedure Part Name Code 1 PRECAUTION - - - 2 CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL - - - - 3 INLET NO. 1 AIR CLEANER 17751 -

     Removal

    REMOVAL CAUTION / NOTICE / HINT COMPONENTS (REMOVAL) Procedure Part Name Code 1 SECURE VEHICLE - - - 2 SHIFT LOCK RELEASE BUTTON COVER

    © 2020-2024 Copyright www.tcorollacross.com