Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: Steering wheel

Adjustment procedure

1. Hold the steering wheel and push the lever down.

Adjusting the steering wheel and mirrors

2. Adjust to the ideal position by moving the steering wheel horizontally and vertically.

After adjustment, pull the lever up to secure the steering wheel.

Adjusting the steering wheel and mirrors

WARNING

■Caution while driving

Do not adjust the steering wheel while driving.

Doing so may cause the driver to mishandle the vehicle and cause an accident, resulting in death or serious injury.

■After adjusting the steering wheel

Make sure that the steering wheel is securely locked.

Otherwise, the steering wheel may move suddenly, possibly causing an accident, and resulting in death or serious injury. Also, the horn may not sound if the steering wheel is not securely locked.

Horn

To sound the horn, press on or close to the mark.

Adjusting the steering wheel and mirrors

    READ NEXT:

     Inside rear view mirror

    The rear view mirror's position can be adjusted to enable sufficient confirmation of the rear view. Adjusting the height of rear view mirror The height of the rear view mirror can be adjusted to suit

     Outside rear view mirrors

    The rear view mirror's position can be adjusted to enable sufficient confirmation of the rear view. ■When using the outside rear view mirrors in a cold weather When it is cold and the outside rear v

     Opening and closing the windows

    SEE MORE:

     Evaporative Emission System Pressure Sensor/Switch Circuit Short to Ground (P045011,P045015,P04502F)

    DTC SUMMARY DTC No. Detection Item DTC Detection Condition Trouble Area MIL Note P045011 Evaporative Emission System Pressure Sensor/Switch Circuit Short to Ground EVAP pressure is less than 42.110 kPa(abs) [6.106 psi(abs)] for 0.5 seconds or more. Ca

     Data List / Active Test

    DATA LIST / ACTIVE TEST DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not. HINT: Using the GTS to read the Data List allows the values or states of swit

    © 2020-2024 Copyright www.tcorollacross.com