Toyota Corolla Cross: Riding with children
Observe the following precautions
when children are
in the vehicle.
Use a child restraint system
appropriate for the child,
until the child becomes
large enough to properly
wear the vehicle's seat belt.
- It is recommended that children
sit in the rear seats to
avoid accidental contact
with the shift lever, wiper
switch, etc.
- Use the rear door child-protector
lock or the window
lock switch to avoid children
opening the door while driving
or operating the power
window accidentally.
- Do not let small children
operate equipment which
may catch or pinch body
parts, such as the power
window, hood, back door,
seats, etc.
WARNING
■When children are in the vehicle
Never leave children unattended
in the vehicle, and never allow
children to have or use the key.
Children may be able to start the
vehicle or shift the vehicle into
neutral. There is also a danger
that children may injure themselves
by playing with the windows,
the moon roof (if equipped)
or other features of the vehicle. In
addition, heat build-up or
extremely cold temperatures
inside the vehicle can be fatal to
children.
READ NEXT:
Before installing a child
restraint system in the vehicle,
there are precautions
that need to be observed,
different types of child
restraint systems, as well as
installation methods, etc.,
written in
The laws of all 50 states of the
U.S.A. as well as Canada now
require the use of child restraint
systems.
Prioritize and observe the
warnings, as well as the laws
and regulations for child
restra
■ When installing a child
restraint system to a front
passenger seat
For the safety of a child, install a
child restraint system to a rear
seat. When installing a child
restraint system to a front p
SEE MORE:
INSTALLATION CAUTION / NOTICE / HINT COMPONENTS (INSTALLATION)
Procedure Part Name Code
1 SERVICE PLUG GRIP
G3834
- -
2 BATTERY SERVICE HOLE COVER
- -
- -
3 NEGATIVE AUXILIARY BATTERY TERMI
DESCRIPTION The E.F.I. vacuum sensor assembly installed to the intake manifold detects the intake manifold pressure using a built-in sensor.
An atmospheric pressure sensor is built into the ECM. When the engine is stopped, the value of the E.F.I. vacuum sensor assembly and atmospheric pressure sen