Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: If a warning light turns on or a warning buzzer sounds

Toyota Corolla Cross (2022-2024) Owner's Manual / When trouble arises / Steps to take in an emergency / If a warning light turns on or a warning buzzer sounds

Calmly perform the following actions if any of the warning lights comes on or flashes. If a light comes on or flashes, but then goes off, this does not necessarily indicate a malfunction in the system. However, if this continues to occur, have the vehicle inspected by your Toyota dealer.

Actions to the warning lights or warning buzzers

■ Brake system warning light (warning buzzer)

Indicates that:

  • The brake fluid level is low; or
  • The brake system is malfunctioning

Immediately stop the vehicle in a safe place and contact your Toyota dealer. Continuing to drive the vehicle may be dangerous.

■ Brake system warning light

Indicates a malfunction in:

  • The regenerative braking system;
  • The electronically controlled brake system; or
  • The parking brake system

Have the vehicle inspected by your Toyota dealer immediately.

■ High coolant temperature warning light* (warning buzzer)

  Indicates that the engine coolant temperature is excessively high

Immediately stop the vehicle in a safe place.

Handling method

*: This light illuminates on the multi-information display.

■ Charging system warning light (warning buzzer)

  Indicates a malfunction in the vehicle's charging system

Immediately stop the vehicle in a safe place and contact your Toyota dealer.

■ Low engine oil pressure warning light* (warning buzzer)

Indicates that the engine oil pressure is excessively low

Immediately stop the vehicle in a safe place and contact your Toyota dealer.

*: This light illuminates on the multi-information display.

■ Malfunction indicator lamp (warning buzzer)

Indicates a malfunction in:

  • The electronic engine control system;
  • The electronic throttle control system;
  • The electronic continuously variable transmission control system; or
  • The Stop & Start system

Immediately stop the vehicle in a safe place and contact your Toyota dealer.

■ SRS warning light

Indicates a malfunction in:

  • The SRS airbag system; or
  • The seat belt pretensioner system

Have the vehicle inspected by your Toyota dealer immediately.

■ ABS warning light

Indicates a malfunction in:

  • The ABS; or
  • The brake assist system

Have the vehicle inspected by your Toyota dealer immediately.

■ Inappropriate pedal operation warning light*(warning buzzer)

When a buzzer sounds:

  • Brake Override System is malfunctioning
  • Drive-Start Control is malfunctioning
  • Drive-Start Control is operating

Follow the instructions displayed on the multi-information display.

When a buzzer does not sound:

Brake Override System is operating.

Release the accelerator pedal and depress the brake pedal.

*: This light illuminates on the multi-information display.

■ Electric power steering system warning light (warning buzzer)

Indicates a malfunction in the EPS (Electric Power Steering) system

Have the vehicle inspected by your Toyota dealer immediately.

■ Low fuel level warning light

2WD models: Indicates that remaining fuel is approximately 1.8 gal. (7.0 L, 1.5 Imp. gal.) or less

AWD models: Indicates that remaining fuel is approximately 2.0 gal. (7.5 L, 1.6 Imp. gal.) or less

Refuel the vehicle.

■ Driver's and front passenger's seat belt reminder light (warning buzzer)*

Warns the driver and/or front passenger to fasten their seat belts

Fasten the seat belt.

If the front passenger's seat is occupied, the front passenger's seat belt also needs to be fastened to make the warning light (warning buzzer) turn off.

*: Driver's seat belt warning buzzer: The driver's seat belt warning buzzer sounds to alert the driver that his or her seat belt is not fastened. Once the engine switch is turned to ON, the buzzer sounds. If the seat belt is still unfastened, the buzzer sounds intermittently for a certain period of time after the vehicle reaches a certain speed.

Front passenger's seat belt warning buzzer: The front passenger's seat belt warning buzzer sounds to alert the front passenger that his or her seat belt is not fastened. If the seat belt is unfastened, the buzzer sounds intermittently for a certain period of time after the vehicle reaches a certain speed.

■ Rear passengers' seat belt reminder lights (warning buzzer)*

Warns the rear passengers to fasten their seat belts

Fasten the seat belt.

*: Rear passengers' seat belt warning buzzer:

The rear passengers' seat belt warning buzzer sounds to alert the rear passenger that his or her seat belt is not fastened. If the seat belt is unfastened, the buzzer sounds intermittently for a certain period of time, after the seat belt is fastened and unfastened and the vehicle reaches a certain speed.

■ Tire pressure warning light (warning buzzer)

When the light comes on after blinking for approximately 1 minute:

Malfunction in the tire pressure warning system

Have the system checked by your Toyota dealer.

When the light comes on:

Low tire inflation pressure such as

  • Natural causes
  • Flat tire

Immediately stop the vehicle in a safe place.

Handling method

■ LTA indicator (warning buzzer)

Indicates a malfunction in the LTA (Lane Tracing Assist)

Follow the instructions displayed on the multi-information display.

■ LDA indicator (warning buzzer)

Indicates a malfunction in the LDA (Lane Departure Alert).

Follow the instructions displayed on the multi-information display.

■ Stop & Start cancel indicator (warning buzzer)

Indicates a malfunction in the Stop & Start system

Have the vehicle inspected by your Toyota dealer immediately.

■ Intuitive parking assist OFF indicator (warning buzzer)

Indicates a malfunction in the intuitive parking assist function

Have the vehicle inspected by your Toyota dealer immediately.

Indicates that the system is temporarily unavailable, possibly due to a sensor being dirty or covered with ice, etc.

Follow the instructions displayed on the multi-information display.

■ PCS warning light (warning buzzer)

Indicates a malfunction in the PCS (Pre-Collision System).

Follow the instructions displayed on the multi-information display.

If the PCS (Pre-Collision System) or VSC (Vehicle Stability Control) system is disabled, the PCS warning light will illuminate.

■ Dynamic radar cruise control indicator (warning buzzer)

Indicates a malfunction in the dynamic radar cruise control.

Follow the instructions displayed on the multi-information display.

■ Cruise control indicator (warning buzzer)

Indicates a malfunction in the cruise control.

Follow the instructions displayed on the multi-information display.

■ Driving assist information indicator

Indicates either of the following systems may be malfunctioning.

  • PCS (Pre-Collision System)
  • LDA (Lane Departure Alert)

Follow the instructions displayed on the multi-information display.

Indicates one of the following systems is malfunctioning or disabled.

  • PKSB (Parking Support Brake)*
  • BSM (Blind Spot Monitor)*
  • RCTA(Rear cross traffic alert)*
  • Safe Exit Assist*

Follow the instructions displayed on the multi-information display.

*: If equipped

■ Slip indicator

Indicates a malfunction in:

  • The VSC system;
  • The TRAC system; or
  • The hill-start assist control system

Have the vehicle inspected by your Toyota dealer immediately.

■ Parking brake indicator

or

  It is possible that the parking brake is not fully engaged or released

Operate the parking brake switch once again.

This light comes on when the parking brake is not released.

If the light turns off after the parking brake is fully released, the system is operating normally.

■ Brake hold operated indicator (warning buzzer

Indicates a malfunction in the brake hold system

Have the vehicle inspected by your Toyota dealer immediately.

■Warning buzzer

In some cases, the buzzer may not be heard due to being in a noisy location or audio sound.

■Front passenger detection sensor, seat belt reminder and warning buzzer

  • If luggage is placed on the front passenger seat, the front passenger detection sensor may cause the warning light to flash and the warning buzzer to sound even if a passenger is not sitting in the seat.
  • If a cushion is placed on the seat, the sensor may not detect a passenger, and the warning light may not operate properly.

■SRS warning light

This warning light indicates problems with the following:

  • Airbag sensor assembly
  • Front impact sensors
  • Side impact sensors (front door)
  • Side impact sensors (front)
  • Front passenger occupant classification sensors
  • Front passenger's seat belt buckle switch
  • "AIR BAG ON" indicator light
  • "AIR BAG OFF" indicator light
  • SRS airbags
  • SRS system related wiring harnesses and power sources

■Electric power steering system warning light (warning buzzer)

When the battery charge becomes insufficient or the voltage temporarily drops, the electric power steering system warning light may come on and the warning buzzer may sound.

■When the tire pressure warning light comes on

Inspect the tires to check if a tire is punctured.

If a tire is punctured.

If none of the tires are punctured: Turn the engine switch off then turn it to ON. Check if the tire pressure warning light comes on or blinks.

If the tire pressure warning light blinks for approximately 1 minute then stays on

There may be a malfunction in the tire pressure warning system. Have the vehicle inspected by your Toyota dealer immediately.

If the tire pressure warning light comes on

1. After the temperature of the tires has lowered sufficiently, check the inflation pressure of each tire and adjust them to the specified level.

2. If the warning light does not turn off even after several minutes have elapsed, check that the inflation pressure of each tire is at the specified level and perform initialization.

■The tire pressure warning light may come on due to natural causes

The tire pressure warning light may come on due to natural causes such as natural air leaks and tire inflation pressure changes caused by temperature.

In this case, adjusting the tire inflation pressure will turn off the warning light (after a few minutes).

■When a tire is replaced with a spare tire

The compact spare tire is not equipped with a tire pressure warning valve and transmitter. If a tire goes flat, the tire pressure warning light will not turn off even though the flat tire has been replaced with the spare tire. Replace the spare tire with the repaired tire and adjust the tire inflation pressure. The tire pressure warning light will go off after a few minutes.

WARNING

■If both the ABS and the brake system warning lights remain on

Stop your vehicle in a safe place immediately and contact your Toyota dealer.

The vehicle will become extremely unstable during braking, and the ABS system may fail, which could cause an accident resulting in death or serious injury.

■When the electric power steering system warning light comes on

When the light comes on yellow, the assist to the power steering is restricted. When the light comes on red, the assist to the power steering is lost and handling operations of the steering wheel become extremely heavy.

When steering wheel operations are heavier than usual, grip the steering wheel firmly and operate it using more force than usual.

■If the tire pressure warning light comes on

Be sure to observe the following precautions.

Failure to do so could cause a loss of vehicle control and result in death or serious injury.

  • Stop your vehicle in a safe place as soon as possible. Adjust the tire inflation pressure immediately.
  • If the tire pressure warning light comes on even after tire inflation pressure adjustment, it is probable that you have a flat tire. Check the tires. If a tire is flat, change it with the spare tire and have the flat tire repaired by the nearest Toyota dealer.
  • Avoid abrupt maneuvering and braking.

    If the vehicle tires deteriorate, you could lose control of the steering wheel or the brakes.

■If a blowout or sudden air leakage should occur

The tire pressure warning system may not activate immediately.

■Maintenance of the tires

Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label (tire and load information label). (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label [tire and load information label], you should determine the proper tire inflation pressure for those tires.)

As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS-tire pressure warning system) that illuminates a low tire pressure telltale (tire pressure warning light) when one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale (tire pressure warning light) illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle's handling and stopping ability.

Please note that the TPMS (tire pressure warning system) is not a substitute for proper tire maintenance, and it is the driver's responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale (tire pressure warning light).

Your vehicle has also been equipped with a TPMS (tire pressure warning system) malfunction indicator to indicate when the system is not operating properly.

The TPMS (tire pressure warning system) malfunction indicator is combined with the low tire pressure telltale (tire pressure warning light). When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated.

This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists. When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended.

TPMS (tire pressure warning system) malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS (tire pressure warning system) from functioning properly. Always check the TPMS (tire pressure warning system) malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS (tire pressure warning system) to continue to function properly.

NOTICE

■To ensure the tire pressure warning system operates properly

Do not install tires with different specifications or makers, as the tire pressure warning system may not operate properly.

    READ NEXT:

     If a warning message is displayed

    The multi-information display shows warnings for system malfunctions and incorrectly performed operations, and messages that indicate a need for maintenance. When a message is displayed, perform the

     If you have a flat tire

    Your vehicle is equipped with a spare tire. The flat tire can be replaced with the spare tire. WARNING ■If you have a flat tire Do not continue driving with a flat tire. Driving even a short distanc

     Taking out the jack

    1. Remove the deck mat. 2. Take out the jack. 2WD models: For tightening For loosening AWD models: Disengage the tightening strap. Taking out the spare tire 1. Remove the deck mat. 2. Remov

    SEE MORE:

     Problem Symptoms Table

    PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by

     On-vehicle Inspection

    ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (a) for LH Side: (1) Operate the windshield wiper motor assembly. (2) Stop the windshield wiper motor assembly operation. (3) Check the automatic stop (park) position. HINT: After the windshield wiper motor assembly is

    © 2020-2024 Copyright www.tcorollacross.com