Toyota Corolla Cross: How To Proceed With Troubleshooting
PROCEDURE
|
1. |
CHECK TIRE AND WHEEL SYSTEM |
| DIAGNOSIS OF IRREGULAR TIRE WEAR |  |
GO TO STEP 11 |
|
|
2. |
TIGHTEN WHEEL NUTS |
Click here .gif)
|
|
3. |
INSPECT TIRES |
Click here
| NG | |
GO TO STEP 10 |
|
|
4. |
INSPECT AND/OR ADJUST WHEEL BALANCE |
Click here
|
|
5. |
INSPECT FRONT AXLE HUB BEARING LOOSENESS AND AXLE HUB RUNOUT |
Click here
| NG | |
GO TO STEP 9 |
|
|
6. |
INSPECT REAR AXLE HUB BEARING LOOSENESS AND AXLE HUB RUNOUT |
- for 2WD:
Click here
- for AWD:
Click here
| NG | |
GO TO STEP 8 |
|
|
7. |
PERFORM ROAD TEST |
| NEXT | |
RETURN VEHICLE TO CUSTOMER |
|
8. |
REPAIR REAR AXLE HUB BEARING LOOSENESS AND AXLE HUB RUNOUT |
- for 2WD:
Click here
- for AWD:
Click here
| NEXT | |
GO TO STEP 7 |
|
9. |
REPAIR FRONT AXLE HUB BEARING LOOSENESS AND AXLE HUB RUNOUT |
Click here
| NEXT | |
GO TO STEP 6 |
|
10. |
REPAIR OR REPLACE TIRE(S) |
| NEXT | |
GO TO STEP 4 |
|
11. |
INSPECT TIRES |
Click here
|
|
12. |
REPAIR OR REPLACE TIRE(S) |
|
|
13. |
INSPECT AND/OR ADJUST FRONT WHEEL ALIGNMENT |
Click here
|
|
14. |
INSPECT AND/OR ADJUST REAR WHEEL ALIGNMENT |
- for 2WD:
Click here
- for AWD:
Click here
|
|
15. |
PERFORM ROAD TEST |
| NEXT | |
RETURN VEHICLE TO CUSTOMER |
READ NEXT:
Inspection
INSPECTION
PROCEDURE
1. INSPECT TIRES
(a) Inspect the tires for wear and proper inflation pressure.
Cold Tire Inflation Pressure:
Tire Size
Cold Tire Inflation Pressure
Tire Repair Seal
Disposal
DISPOSAL
PROCEDURE
1. DISPOSE OF TIRE REPAIR SEAL
HINT:
Confirm the expiration date on the side of the repair seal bottle.
(a) Dispose of the retrieved seal by consigning disposal to
SEE MORE:
A/F (O2) Sensor Signal Biased/Stuck Lean Bank 1 Sensor 2 Circuit Current Above Threshold (P227019,P227118)
DESCRIPTION Refer to DTC P003612. Click here
HINT: Although the DTC title say O2 sensor, these DTCs relate to the air fuel ratio sensor (sensor 2).
DTC No. Detection Item
DTC Detection Condition Trouble Area
MIL Note
P227019 A/F (O2) Sensor Signal Biased/Stuck Lea
Installation
INSTALLATION CAUTION / NOTICE / HINT COMPONENTS (INSTALLATION)
Procedure Part Name Code
1 FRONT EXHAUST PIPE ASSEMBLY (TWC: Rear Catalyst)
17410
- -
2 AIR FUEL RATIO SENSOR
89467C -
- -
3 TAIL EXHAUST P
