Toyota Corolla Cross: Heated steering wheel/seat heaters
Warms up the grip of the
steering wheel
Warm up the seat upholstery
WARNING
■To prevent minor burn injuries
Care should be taken if anyone in
the following categories comes in
contact with the steering wheel or
seats when the heater is on:
- Babies, small children, the
elderly, the sick and the physically
challenged
- Persons with sensitive skin
- Persons who are fatigued
- Persons who have taken alcohol
or drugs that induce sleep
(sleeping drugs, cold remedies,
etc.)
NOTICE
■To prevent damage to the
seat heaters
Do not put heavy objects that
have an uneven surface on the
seat and do not stick sharp
objects (needles, nails, etc.) into
the seat.
■To prevent battery discharge
Do not use the functions when the
engine is off.
Operation instructions
■ Heated steering wheel
Turns heated steering wheel
on/off
When the heated steering wheel is
on, the indicator illuminates on the
heated steering wheel switch.
■ Seat heaters
Turns seat heaters on/off
- High temperature
- Low temperature
When the seat heater is on, the
indicator illuminates on the seat
heater switch.
When not in use, put the switch in
the neutral position. The indicator
will turn off.
■The heated steering wheel and
seat heaters can be used when
The engine switch is in ON.
WARNING
■To prevent overheating and
minor burn injuries
Observe the following precautions
when using the seat heaters.
- Do not cover the seat with a
blanket or cushion when using
the seat heater.
- Do not use seat heater more
than necessary.
READ NEXT:
Interior lights list
Location of the interior lights
Rear interior light
Door trim lights (if equipped)
Front interior/personal lights
Center tray light (if equipped)
Front cup holder light (
Location of the storage features
Bottle holders
Open tray (if equipped)
Glove box
Cup holders
Console box
WARNING
■Items that should not be left
in the storage spaces
Do not leave glasses,
SEE MORE:
DESCRIPTION The multiplex network door ECU receives signals from the latch switch, initial switch, pawl switch and back door courtesy switch, which are built into the back door lock assembly. Based on these switch signals, the latch position of the back door lock with courtesy light switch assembly
DESCRIPTION
When the electric parking brake switch is pulled, a lock request
signal is sent from the skid control ECU (brake actuator assembly) to the parking
brake actuator assembly. When the electric parking brake switch is pushed, a release
request signal is sent from the skid control ECU