Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: Front Air Outlet Damper Control Servo Motor Actuator Stuck Off (B14037F)

Toyota Corolla Cross (2022-2024) Service Manual / Vehicle Interior / Heating / Air Conditioning / Air Conditioning System (for Gasoline Model With Manual Air Conditioning System) / Front Air Outlet Damper Control Servo Motor Actuator Stuck Off (B14037F)

DESCRIPTION

The No. 1 air conditioning radiator damper servo sub-assembly sends pulse signals to inform the air conditioning amplifier assembly of the damper position.

The air conditioning amplifier assembly activates the motor (normal or reverse) based on these signals to move the air outlet damper to the appropriate position, which controls the air outlet switching.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

Memory

B14037F

Front Air Outlet Damper Control Servo Motor Actuator Stuck Off

Diagnosis Condition:

  • No. 1 air conditioning radiator damper servo sub-assembly operating

Malfunction Status:

  • Damper servo operation request signals are output but the damper position sensor value does not change or abnormal

Detection Time:

  • Continuously for 30 seconds or more
  • No. 1 air conditioning radiator damper servo sub-assembly
  • Air conditioning harness assembly
  • Air conditioning radiator assembly

Memorized
DTC Detection Condition Combination Table
 

Vehicle Condition

Pattern 1

Pattern 2

Diagnosis Condition

No. 1 air conditioning radiator damper servo sub-assembly operating

○

○

Malfunction

Damper servo operation request signals are output but the damper position sensor value does not change

○

-

Damper servo operation request signals are output but the damper position sensor value is abnormal

-

○

Detection Time

Continuously for 30 seconds or more

Continuously for 30 seconds or more

Trip Count

1 trip

1 trip

HINT:

If the conditions of either of these patterns are detected, a DTC will be stored

CAUTION / NOTICE / HINT

NOTICE:

  • This DTC is also output for the damper link, damper lock, etc. Before performing inspection, perform servomotor initialization and check that there are no mechanical malfunctions.

    Click here

  • This DTC is also output when servomotor initialization has failed. When servomotor initialization has failed, repair any malfunctions and perform servomotor initialization again.

    Click here

PROCEDURE

1.

CHECK NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (INSTALLATION CONDITION)

(a) Check that the No. 1 air conditioning radiator damper servo sub-assembly is installed correctly.

Click here

OK:

The No. 1 air conditioning radiator damper servo sub-assembly is installed correctly.

NG

INSTALL NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY CORRECTLY

OK

2.

CHECK NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (MOTOR, LINK, DAMPER)

(a) Check for a wire harness caught between the links of the motors and dampers.

OK:

No wire harnesses are caught between the links of the motors and dampers.

NG

REMOVE PINCHED WIRE HARNESS
OK

3.

CHECK AIR CONDITIONING RADIATOR ASSEMBLY (DAMPER)

(a) Remove the No. 1 air conditioning radiator damper servo sub-assembly.

Click here

(b) Operate the dampers by hand.

OK:

The dampers are easily operated by hand.

OK

REPLACE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY

NG

REPLACE AIR CONDITIONING RADIATOR ASSEMBLY

    READ NEXT:

     Lost Communication with Front Air Mix Damper Control Servo Motor LIN Missing Message (B140587)

    DESCRIPTION The air conditioning harness assembly connects the air conditioning amplifier assembly and the No. 1 air conditioning radiator damper servo sub-assembly. The air conditioning amplifier a

     Front Air Mix Damper Control Servo Motor Actuator Stuck Off (B14067F)

    DESCRIPTION The No. 1 air conditioning radiator damper servo sub-assembly sends pulse signals to inform the air conditioning amplifier assembly of the damper position. The air conditioning amplifier a

     Servo Motor LIN Communication Bus off (B142A88)

    DESCRIPTION The air conditioning harness assembly connects the air conditioning amplifier assembly and the servo motors. The air conditioning amplifier assembly supplies power and sends operation inst

    SEE MORE:

     Parts Location

    PARTS LOCATION ILLUSTRATION *A w/ Fog Light *B for Outer Rear View Mirror Type Side Turn Signal Light *1 HEADLIGHT ASSEMBLY LH - PARKING LIGHT BULB (for Bulb Type Clearance Light) - FRONT TURN SIGNAL LIGHT BULB (for Bulb Type Clearance Light) - FRONT SIDE MARKER LIGHT

     Customer Problem Analysis Check

    CUSTOMER PROBLEM ANALYSIS CHECK HINT: Be sure to ask the customer in detail about the following points concerning the vehicle operating conditions, environment and problem, and then check for DTCs. If the entry unlock function does not operate. If the power source mode does not change

    © 2020-2024 Copyright www.tcorollacross.com