Toyota Corolla Cross: Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
Power Door Lock Control System
|
DTC No. | Detection Item |
Link |
| B124300 |
Impact Detection Sensor Circuit Malfunction |
.gif) |
READ NEXT:
DESCRIPTION If the collision door lock release function does not operate normally, or an open or short in the GSW input circuit of the main body ECU (multiplex network body ECU) is detected, DTC B1243
DESCRIPTION The main body ECU (multiplex network body ECU) receives door key cylinder lock or unlock switch signals from the front door lock with motor assembly (for driver door). The main body ECU (m
DESCRIPTION The main body ECU (multiplex network body ECU) receives switch signals from the multiplex network master switch assembly via LIN communication system. The main body ECU (multiplex network
SEE MORE:
UTILITY
INITIALIZE THE CONNECTION INFORMATION OF A GATEWAY FUNCTION EQUIPPED ECU (BUS
MONITOR ECU)
(a) Initialize the ECU.
Body Electrical > Central Gateway > Utility
Tester Display
Initialization
Body Electrical > Main Body > Utility
DIAGNOSIS SYSTEM
OBD II
When troubleshooting OBD II (On-Board Diagnostics) vehicles, the GTS (complying
with SAE J1978) must be connected to the DLC3 (Data Link Connector 3) of the vehicle.
Various data in the vehicle's TCM (Transmission Control Module) can be then read.
OBD II regulati
