Toyota Corolla Cross: Data List / Active Test
DATA LIST / ACTIVE TEST
DATA LIST
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
HINT:
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
(a) Read the Data List according to the display on the GTS.
Body Electrical > Main Body > Data List|
Tester Display | Measurement Item |
Range | Normal Condition |
Diagnostic Note |
|---|---|---|---|---|
|
FR Door Lock Position Switch Status |
Front door RH unlock detection switch signal |
Lock or Unlock | Lock: Front door RH locked Unlock: Front door RH unlocked |
- |
| FL Door Lock Position Switch Status |
Front door LH unlock detection switch signal |
Lock or Unlock | Lock: Front door LH locked Unlock: Front door LH unlocked |
- |
| RR Door Lock Position Switch Status |
Rear door RH unlock detection switch signal |
Lock or Unlock | Lock: Rear door RH locked Unlock: Rear door RH unlocked |
- |
| RL Door Lock Position Switch Status |
Rear door LH unlock detection switch signal |
Lock or Unlock | Lock: Rear door LH locked Unlock: Rear door LH unlocked |
- |
| Back Door Lock Position Status |
Back door lock signal |
Lock or Unlock | Lock: Back door locked Unlock: Back door unlocked |
- |
| FR Door Courtesy Switch Status |
Front door courtesy light switch assembly (RH) signal |
Close or Open | Close: Front door RH closed Open: Front door RH open |
- |
| FL Door Courtesy Switch Status |
Front door courtesy light switch assembly (LH) signal |
Close or Open | Close: Front door LH closed Open: Front door LH open |
- |
| RR Door Courtesy Switch Status |
Rear door courtesy light switch assembly (RH) signal |
Close or Open | Close: Rear door RH closed Open: Rear door RH open |
- |
| RL Door Courtesy Switch Status |
Rear door courtesy light switch assembly (LH) signal |
Close or Open | Close: Rear door LH closed Open: Rear door LH open |
- |
| Back Door Courtesy Switch Status |
Back door courtesy light switch signal |
Close or Open | Close: Back door closed Open: Back door open | w/o Power Back Door Control System |
|
Hood Courtesy Switch Status |
Engine hood courtesy switch |
Close or Open | Close: Engine hood closed Open: Engine hood open |
- |
| Intrusion Sensor Cancel Switch |
- | - |
- | Although the item is displayed on the GTS, it is not applicable to this vehicle. |
|
Glass Breakage Sensor |
- | - |
- | Although the item is displayed on the GTS, it is not applicable to this vehicle. |
|
IGR Power | Ignition switch ON signal |
OFF or ON | OFF: Ignition switch off or ACC ON: Ignition switch ON |
- |
| Panic Function |
Setting of customize setting "Panic Function" |
Disable or Enable | Customize setting displayed |
- |
ACTIVE TEST
HINT:
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
(a) Perform the Active Test according to the display on the GTS.
Body Electrical > Main Body > Active Test|
Tester Display | Measurement Item |
Control Range | Diagnostic Note |
|---|---|---|---|
|
Vehicle Horn | Vehicle horns |
OFF/ON | - |
|
Security Horn | Security horn assembly |
OFF/ON | - |
|
Tester Display | Measurement Item |
Control Range | Diagnostic Note |
|---|---|---|---|
|
Immobiliser Indicator |
Security indicator | OFF/ON |
- |
READ NEXT:
Engine Hood Courtesy Switch Circuit
DESCRIPTION The engine hood courtesy switch is built into the hood lock assembly. This switch turns on when the engine hood is closed and turns off when the engine hood is opened. WIRING DIAGRAM
CA
Horn Circuit
DESCRIPTION When the theft deterrent system is switched from the armed state to the alarm sounding state, the main body ECU (multiplex network body ECU) transmits a signal to cause the horn to sound a
Security Horn Circuit
DESCRIPTION When the theft deterrent system is switched from the armed state to the alarm sounding state, the main body ECU (multiplex network body ECU) transmits a signal to cause the security horn a
SEE MORE:
Brake System Control Module "A" Calibration / Parameter Memory Failure (C059746)
DESCRIPTION
If the system information stored by the skid control ECU (brake
actuator assembly) is corrupted, this DTC is output.
DTC No.
Detection Item
DTC Detection Condition
Trouble Area
C059746
Brake System Control Module
Diagnosis System
DIAGNOSIS SYSTEM
CHECK FOR DTCs (USING SYSTEM CHECK MODE SCREEN)
HINT:
When system self-diagnosis DTCs cannot be output due to a malfunction
that is preventing diagnosis mode from being started or the multi-display
from displaying, read the DTCs using the GTS.
Depending on the multi
