Toyota Corolla Cross: Data List / Active Test
DATA LIST / ACTIVE TEST
DATA LIST
NOTICE:
In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
HINT:
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
(a) Read the Data List according to the display on the GTS.
Body Electrical > Power Distribution Box > Data List|
Tester Display | Measurement Item |
Range | Normal Condition |
Diagnostic Note |
|---|---|---|---|---|
|
Passenger Seat Buckle Switch Status |
Front passenger side seat belt buckle switch status |
Set, Unset or Unknown | Set: Front passenger side seat belt fastened Unset: Front passenger side seat belt not fastened Unknown: Data is not determined |
- |
| Passenger Seat Occupant Sensor Status |
Passenger seat occupant detection sensor status |
OFF, ON or Unknown | OFF: Front passenger seat not occupied ON: Front passenger seat occupied Unknown: Data is not determined |
- |
| Rear Seat RH Buckle Switch Status |
Rear RH seat belt buckle switch status |
Set, Unset or Unknown | Unknown Set: Rear RH seat belt fastened Unset: Rear RH seat belt not fastened Unknown: Data is not determined |
- |
| Rear Seat Center Buckle Switch Status |
Rear center seat belt buckle switch status |
Set, Unset or Unknown | Set: Rear center seat belt fastened Unset: Rear center seat belt not fastened Unknown: Data is not determined |
- |
| Rear Seat LH Buckle Switch Status |
Rear LH seat belt buckle switch status |
Set, Unset or Unknown | Set: Rear LH seat belt fastened Unset: Rear LH seat belt not fastened Unknown: Data is not determined |
- |
|
Tester Display | Measurement Item |
Range | Normal Condition |
Diagnostic Note |
|---|---|---|---|---|
|
RR Door Courtesy Switch Status |
Rear door courtesy light switch (for RH) |
Close or Open | Close: Rear door RH closed Open: Rear door RH open |
- |
| RL Door Courtesy Switch Status |
Rear door courtesy light switch (for LH) |
Close or Open | Close: Rear door LH closed Open: Rear door LH open |
- |
|
Tester Display | Measurement Item |
Range | Normal Condition |
Diagnostic Note |
|---|---|---|---|---|
|
Occupant Detection Status |
Front passenger classification |
Unknown, Nothing, Child, Female, Male or Malfunction |
Nothing, Child, Female or Male |
- |
| Passenger Seat Buckle Switch Status |
Front passenger side buckle switch |
Unknown, Unbuckle, Buckle or Malfunction |
Unknown: Data is not determined Unbuckle: Front passenger side seat belt unbuckle Buckle: Front passenger side seat belt buckle Malfunction: Front passenger side seat belt buckle circuit malfunction |
- |
|
Tester Display | Measurement Item |
Range | Normal Condition |
Diagnostic Note |
|---|---|---|---|---|
|
Driver Buckle Switch | Driver side seat belt buckle switch status |
Fastened or Not Fastened |
Fastened: Driver side seat belt fastened Not Fastened: Driver side seat belt not fastened |
- |
| Rear Right Seat Buckle / Occupant Detection Warning Switch |
Rear seat inner with center belt RH buckle signal |
OFF or ON | OFF: Rear RH seat belt fastened ON: Rear RH seat belt not fastened |
- |
| Rear Left Seat Buckle / Occupant Detection Warning Switch |
Rear seat inner with center belt LH (for LH) buckle signal |
OFF or ON | OFF: Rear LH seat belt (for LH) fastened ON: Rear LH seat belt (for LH) not fastened |
- |
| Rear Center Seat Buckle / Occupant Detection Warning Switch |
Rear seat inner with center belt LH (for center) buckle signal |
OFF or ON | OFF: Rear LH seat belt (for center) fastened ON: Rear LH seat belt (for center) not fastened |
- |
| Driver Seatbelt Warning Buzzer Function |
Driver seat belt warning buzzer |
OFF or ON | Customized setting displayed |
- |
| Passenger Seatbelt Warning Buzzer Function |
Front passenger seat belt warning buzzer |
OFF or ON | Customized setting displayed |
- |
| Rear Right Seatbelt Warning Buzzer Function |
Rear RH seat belt warning buzzer |
OFF or ON | Customized value displayed |
- |
| Rear Left Seatbelt Warning Buzzer Function |
Rear LH seat belt warning buzzer |
OFF or ON | Customized value displayed |
- |
| Rear Center Seatbelt Warning Buzzer Function |
Rear center seat belt warning buzzer |
OFF or ON | Customized value displayed |
- |
ACTIVE TEST
HINT:
Using the GTS, perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
(a) Perform the Active Test according to the display on the GTS.
Body Electrical > Combination Meter > Active Test|
Tester Display | Measurement Item |
Control Range | Diagnostic Note |
|---|---|---|---|
|
Buzzer Operation (800Hz, Vol L, W/ Damping) |
Combination meter buzzer
| ON |
- |
| Buzzer Operation (800Hz, Vol L, W/O Damping) |
Combination meter buzzer
| ON |
- |
| Buzzer Operation (800Hz, Vol S, W/ Damping) |
Combination meter buzzer
| ON |
- |
| Buzzer Operation (800Hz, Vol S, W/O Damping) |
Combination meter buzzer
| ON |
- |
| Driver Side Seat Belt Warning |
Driver side seat belt warning light |
OFF/ON | - |
READ NEXT:
On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE
1. INSPECT DRIVER SEAT BELT WARNING LIGHT HINT: The seat belt warning light on the combination meter assembly is used for both the driver seat and front passenger sea
Driver Side Seat Belt Warning Light does not Operate
DESCRIPTION The combination meter assembly blinks or turns off the seat belt warning light on the combination meter assembly in accordance with the state of the front seat inner belt assembly LH. WIRI
Front Passenger Side Seat Belt Warning Light does not Operate
DESCRIPTION The combination meter assembly blinks or turns off the passenger seat belt warning light on the combination meter assembly in accordance with the state of the front seat inner belt assembl
SEE MORE:
Brake System Control Module "A" Calibration / Parameter Memory Failure (C059746,C060B49,C061049,C13B000,C13CF1C,C13D41C)
DESCRIPTION
The following DTCs are stored when a malfunction occurs in the
skid control ECU (brake actuator assembly).
DTC No.
Detection Item
DTC Detection Condition
Trouble Area
Memory
Note
C059746
Bra
Parts Location
PARTS LOCATION
ILLUSTRATION
*A
for LED Type Parking Light without AFS
-
-
*1
NO. 1 ENGINE ROOM RELAY BLOCK
- WASHER FUSE
*2
HEADLIGHT ASSEMBLY RH
*3
HEADLIGHT ASSEMBLY LH
