Toyota Corolla Cross: Customize Parameters
CUSTOMIZE PARAMETERS
CUSTOMIZE AIR CONDITIONING SYSTEM
(a) Customizing with the GTS.
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
HINT:
The following items can be customized.
(1) Select the setting by referring to the table below.
Air Conditioner|
Tester Display | Description |
Default | Setting |
ECU |
|---|---|---|---|---|
| Foot/DEF Automatic Blow Up Function |
Function to increase the blower level automatically when the defroster is on |
ON | $00:OFF,$01:ON |
Air conditioning amplifier assembly |
|
Foot/DEF Auto Mode | Function to change the air outlet mode to foot/defroster automatically when AUTO mode is on |
ON | $00:OFF,$01:ON |
Air conditioning amplifier assembly |
|
Efficient Ventilation Mode |
Function to change the mode automatically to recirculation air mode when turning the A/C on to cool the cabin quickly |
ON | $00:OFF,$01:ON |
Air conditioning amplifier assembly |
|
Fan Speed Increment Control |
Function to set the speed to reach the target blower fan speed when AUTO mode is on |
Normal | $01:Short,$00:Normal,$02:Long |
Air conditioning amplifier assembly |
|
Outside Air Mode Auto Switch Function |
Function to automatically change the air inlet to FRESH mode when the ignition switch is off for 60 seconds |
ON | $00:OFF,$01:ON |
Air conditioning amplifier assembly |
|
Evaporator Control | Function to set the evaporator control to the automatic position (Automatic) to save power or to the coldest position (Manual) to dehumidify the air and to prevent the windows from fogging up |
Automatic | $00:Manual,$01:Automatic |
Air conditioning amplifier assembly |
|
Set Temperature Shift | Function to perform control with the shifted temperature versus the displayed temperature |
Normal | $05:-2C,$06:-1C,$00:Normal,$01:+1C,$02:+2C |
Air conditioning amplifier assembly |
|
Refrigerant Shortage Check |
Function to cancel the refrigerant shortage check (check performed during normal operation) when set to ON |
ON | $00:OFF,$01:ON |
Air conditioning amplifier assembly |
|
A/C Auto Switch Mode | Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off |
ON | $00:OFF,$01:ON |
Air conditioning amplifier assembly |
READ NEXT:
Initialization
INITIALIZATION SERVO MOTOR INITIALIZATION (a) Press the OFF switch.
(b) According to the GTS display, perform servo motor initialization. Body Electrical > Air Conditioner > Utility
Te
Utility
UTILITY REFRIGERANT SHORTAGE CHECK USING GTS (a) Check that the following conditions are met and perform the refrigerant shortage check according to the display on the GTS. Measurement Condition:
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE
NOTICE:
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in ord
SEE MORE:
Front Control Rear Air Outlet Damper Control Servo Motor Actuator Stuck Off (B13AB7F)
DESCRIPTION The No. 2 air conditioning radiator damper servo sub-assembly sends pulse signals to inform the air conditioning amplifier assembly of the damper position.
The air conditioning amplifier assembly activates the motor (normal or reverse) based on these signals to move the No. 2 air condi
Fail-safe Chart
FAIL-SAFE CHART If any of the following DTCs are stored, the engine stop and start ECU enters fail-safe mode to preserve vehicle operability.
DTC Component
Fail-safe Operation Fail-safe Deactivation Condition
P033562 Open in engine speed signal circuit
- All of the f
