Toyota Corolla Cross: Content of driving information
■ Display items
- Speedometer display/Driving range
- Fuel economy
- Eco Driving Indicator/Driving range
■ Speedometer display/Driving range
- Speedometer display
- Driving range
Displays driving range with remaining fuel. Use the displayed values as a reference only.
This distance is computed based on your average fuel consumption.
As a result, the actual distance that can be driven may differ from that displayed.
When only a small amount of fuel is added to the tank, the display may not be updated.
When refueling, turn the engine switch off. If the vehicle is refueled without turning the engine switch off, the display may not be updated.
■ Fuel economy
Use the displayed values as a reference only.
.png)
- Average fuel economy (after reset)
To reset the average fuel economy display, press and hold the OK meter control switch.
- Current fuel consumption
Displays instantaneous current fuel consumption.
- Driving range
Displays driving range with remaining fuel.
This distance is computed based on your average fuel consumption.
As a result, the actual distance that can be driven may differ from that displayed.
When only a small amount of fuel is added to the tank, the display may not be updated.
When refueling, turn the engine switch off. If the vehicle is refueled without turning the engine switch off, the display may not be updated.
The average fuel economy display
can be changed in 
.
- Average fuel economy (after start)
Displays the average fuel consumption since engine start.
- Average fuel economy (after refuel)
Displays the average fuel consumption since the vehicle was refueled.
To reset the average fuel economy display, press and hold the meter control switch.
■ Eco Driving Indicator/Driving range
- Eco Driving Indicator
.png)
- Eco Driving Indicator Light
During Eco-friendly acceleration (Eco driving), the Eco Driving Indicator Light will turn on. When the acceleration exceeds the Zone of Eco driving, or when the vehicle is stopped, the light turns off.
- Eco Driving Indicator Zone Display
Suggests the Zone of Eco driving with current Eco driving ratio based on acceleration.
- Eco driving ratio based on acceleration
If the acceleration exceeds the Zone of Eco driving, the right side of the Eco Driving Indicator Zone Display will illuminate.
At this time, the Eco Driving Indicator Light will turn off.
- Zone of Eco driving
- Driving range
Displays driving range with remaining fuel. Use the displayed values as a reference only.
This distance is computed based on your average fuel consumption.
As a result, the actual distance that can be driven may differ from that displayed.
When only a small amount of fuel is added to the tank, the display may not be updated.
When refueling, turn the engine switch off. If the vehicle is refueled without turning the engine switch off, the display may not be updated.
■Eco Driving Indicator
Eco Driving Indicator will not operate under the following conditions:
- The shift lever is in any position other than D.
- The vehicle speed is approximately 80 mph (130 km/h) or higher.
READ NEXT:
Driving support system
information display
■ Driving support system
information
Select to display the operational
status of the following systems:
LTA (Lane Tracing Assist)
LDA (Lane Departure Alert)
PCS (Pre-Collision System)
Dynamic r
Vehicle information display
■ Drive information
Displays drive information such as
the following:
Drive information type
Drive information items
Displays the following depending
on which drive information type and drive i
Settings display
■ Meter display settings that
can be changed
Language
Select to change the language displayed.
Units
Select to change the units of measure
displayed.
Eco Driving Indicator Light
Select to e
SEE MORE:
Cylinder 1 Injector Circuit Range/Performance (P02EE00,P02EF00,P02F000,P02F100)
DESCRIPTION By using Partial Lift Fuel Injection Control to spray fuel before the needle inside each direct fuel injector assembly has fully opened, the injection of fuel by the direct fuel injector assembly can be precisely controlled at partial lift. Due to the influence on the injected fuel volum
Back Door Closer Switch General Electrical Failure (B225101)
DESCRIPTION The multiplex network door ECU receives signals from the latch switch, initial switch, pawl switch and back door courtesy switch, which are built into the back door lock assembly. Based on these switch signals, the latch position of the back door lock with courtesy light switch assembly
