Toyota Corolla Cross: Toyota Safety Sense 3 software update
It is necessary to enter a connected services contract, provided by Toyota, to use these functions. For details, contact your Toyota dealer.
WARNING
■For safe use
When the Toyota Safety Sense 3 software is updated, the operating methods of functions may change. Using this system without knowing the correct operating methods may lead to an accident resulting in death or serious injury.
- Make sure to read the Digital Owner's Manual which corresponds to the software version of the system, available at the Owner's Manual website, before using this system.
Content of the Toyota Safety Sense 3 Owner's Manual
This Owner's Manual contains information for Ver. 1. For the latest information about the controls, use, warnings/precautions, etc. of each function of Toyota Safety Sense 3, refer to the Digital Owner's Manual at the Owner's Manual website.
If the software of this system has been updated after initial purchase of the vehicle, before using this system, be sure to read the Owner's Manual which corresponds to the software version of the system.
■Precautions for use
- Be aware that some functions may temporarily be disabled if a legal or safety related issue occurs.
- If a connected services contract has not been entered or has expired, software updates will not be able to be performed wirelessly.
Checking your vehicle's Toyota Safety Sense 3 version
If the software of this system has been updated after initial purchase of the vehicle, to access the appropriate Owner's Manual, it is necessary to check the software version of the system and then visit the Owner's Manual website.
Updating the software
If a software update is available, a notification will be displayed by OneApp. Follow the instructions displayed on the screen.
■Software update precautions
- After a software update has been performed, it will not be possible to revert to a previous version.
- Depending on the communication environment and the content of an update, a software update may take several hours. Although an update will be suspended when the engine switch is turned off, it will resume when the engine switch is changed back to ON.
- Toyota Safety Sense 3 can still be used while a software update is being performed.
■What can be checked using the OneApp
The following items can be checked or performed.
- Software version, update details, precautions, use methods, etc.
- Software update
READ NEXT:
Toyota Safety Sense 3.0
The Toyota Safety Sense 3.0
consists of the driving
assist systems and contributes
to a safe and comfortable
driving experience:
WARNING
■Toyota Safety Sense 3.0
The Toyota Safety Sense 3.0
operates
Sensors used by Toyota
Safety Sense 3.0
Various sensors are used to
obtain the necessary information
for system operation.
■ Sensors which detect the
surrounding conditions
Front radar sensor
Front camera
WARNING
■To prevent malfun
PCS (Pre-Collision System)
The pre-collision system
uses sensors to detect
objects in the path
of the vehicle. When the
system determines that the
possibility of a frontal collision
with a detectable
object is high, a warning
o
SEE MORE:
Brake Pressure Sensor "A" Circuit Voltage Below Threshold (C054016,C054017)
DESCRIPTION
The master cylinder pressure sensor is connected to the skid
control ECU inside the brake actuator assembly.
DTC No.
Detection Item
DTC Detection Condition
Trouble Area
MIL
DTC Output from
Note
Under Hood
UNDER HOOD
GENERAL NOTES
Maintenance requirements vary depending on country.
Check the maintenance schedule in the owner's manual.
Following the maintenance schedule is mandatory.
Determine the appropriate time to service the vehicle using either miles
driven or time (months) el
