Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: Remote Service Malfunction

PROCEDURE

1.

CHECK CAN COMMUNICATION SYSTEM

(a) Enter the following menus: Bus Check.

  • for HEV Model:

    Click here

  • for Gasoline Model:

    Click here

(b) Check that all ECUs and sensors that use CAN communication are connected.

Result

Proceed to

There are no connection problems.

A

There is a connection problem.

B

B

GO TO CAN COMMUNICATION SYSTEM

  • for HEV Model:

    Click here

  • for Gasoline Model:

    Click here

A

2.

CHECK DTC OUTPUT

(a) Connect the GTS to the DLC3.

(b) Enter the following menus: Health Check.

(c) Check for DTCs.

Result

Proceed to

DTCs are not output.

A

DTCs are output.

B

B

INSPECT EACH ECU SYSTEM

A

3.

CHECK OPERATION OF EACH SYSTEM

(a) Check that each system related to Remote Connect operates normally.

(1) Check power door lock control system

Click here

(2) Check smart key system (for Entry Function)

  • for HEV Model:

    Click here

  • for Gasoline Model:

    Click here

(3) Check smart key system (for Start Function)

  • for HEV Model:

    Click here

  • for gasoline model:

    Click here

(4) Check theft deterrent system

Click here

(5) Check lighting system (INT)

Click here

(6) Check meter/gauge system

Click here

(7) Check air conditioning system

  • for HEV Model:

    Click here

  • for Gasoline Model with Automatic Air Conditioning System:

    Click here

  • for Gasoline Model with Manual Air Conditioning System:

    Click here

(8) Check power window control system

Click here

(9) Check sliding roof system

Click here

(10) Check lighting system (EXT)

  • w/ AFS:

    Click here

  • w/o AFS:

    Click here

Result

Proceed to

All of the systems related to Remote Connect operate normally.

A

Any system related to Remote Connect does not operate normally.

B

B

GO TO ABNORMAL SYSTEM

A

4.

CHECK DCM OPERATION HISTORY

(a) Check DCM Operation History.

Click here

Body Electrical > Telematics > Utility

Tester Display

DCM Operation History

NEXT

CONTACT SERVICE CENTER

    READ NEXT:

     Brake

    h1 {color:red;} h2 {color:blue;} h3 {color:green;}

     Brake (front)

     Front Brake

    SEE MORE:

     Driver Side Door Entry Unlock Function does not Operate

    DESCRIPTION If the entry unlock function does not operate for the driver door only, but the entry lock function operates, the request code is being transmitted properly from the driver door. In this case, there may be a problem related to the unlock sensor (connection between the certification ECU (

     Fuel Level Sensor "A" Signal Stuck In Range (P04602A)

    DESCRIPTION Refer to DTC P046012. Click here DTC No. Detection Item DTC Detection Condition Trouble Area MIL Note P04602A Fuel Level Sensor "A" Signal Stuck In Range The change in the fuel sender gauge value is below the threshold when a certain amount of fu

    © 2020-2025 Copyright www.tcorollacross.com