Toyota Corolla Cross Owners & Service Manuals

Toyota Corolla Cross: Operation Check

OPERATION CHECK

CHECK CUSTOMIZE PARAMETERS

NOTICE:

The operation check below is based on the non-customized initial condition of the vehicle.

Click here

HINT:

  • The switches described in this text are the switches for transmitting signals. The switches are built into the electrical key transmitter sub-assembly.
  • All the functions listed below must be checked in comparison with the wireless door lock control operation area.

CHECK BASIC FUNCTION

(a) Check whether the LED of the electrical key transmitter sub-assembly comes on 3 times when each switch is pressed and held for 5 seconds.

HINT:

  • If the transmitter LED illuminates once or twice but not a third time when the switch has been pressed and held for 5 seconds or more, it may have a weak transmitter battery.
  • If the switch is held, the transmitter LED illuminates repeatedly.

(b) Check that all doors lock when the lock switch is pressed.

(c) Check that all doors unlock when the unlock switch is pressed.*1

(d) Check that the driver door unlocks when the unlock switch is pressed once, and all doors unlock when pressed twice within 5 seconds.*2

(e) Check that the back door opens or closes when the power back door switch is pressed and held for 0.8 seconds or more.*3

  • *1: Customize item "Wireless Unlock Twice Function" is set to "Disable" or "2-Press unlock" is set to "Off".
  • *2: Customize item "Wireless Unlock Twice Function" is set to "Enable" or "2-Press unlock" is set to "On".
  • *3: w/ Power Back Door System

CHECK CHATTERING PREVENTION FUNCTION

(a) Check that the corresponding operation occurs only once and is not repeated continuously while the switch is held. However, when the switch is operated repeatedly at 1-second intervals, check that the corresponding operation is carried out.

CHECK THE REPEAT FUNCTION

(a) Check that all of the doors attempt to automatically lock 1 second after the lock switch has been pressed while the driver door control knob is being held in the unlock position.

CHECK SWITCH OPERATION FAIL-SAFE FUNCTION

(a) Check that the doors cannot be locked/unlocked when operating a switch on an unregistered electrical key transmitter sub-assembly, but that the doors can be locked/unlocked when operating a switch on the registered electrical key transmitter sub-assembly.

CHECK ANSWER-BACK (WIRELESS DOOR LOCK BUZZER) FUNCTION

(a) When the lock switch is pressed, check that the buzzer sounds once simultaneously with the locking operation of all doors.

(b) When the lock switch is pressed with any door open and then the doors are closed, check that the buzzer sounds once.*1

(c) When the unlock switch is pressed once, check that the buzzer sounds twice simultaneously with the unlocking operation of all doors.*2

(d) When the unlock switch is pressed once, check that the buzzer sounds twice simultaneously with the unlocking operation of the driver door.*3

(e) When the back door is opened by wireless operation, the wireless door lock buzzer sounds.

  • *1: Customize item "Wireless Lock Function with Doors Open" is set to "Enable" or "Wireless Lock When Door Opened" is set to "On".
  • *2: Customize item "Wireless Unlock Twice Function" is set to "Disable" or "Remote 2-Press unlock" is set to "Off".
  • *3: Customize item "Wireless Unlock Twice Function" is set to "Enable" or "Remote 2-Press unlock" is set to "On".

CHECK ANSWER-BACK (HAZARD WARNING LIGHT) FUNCTION

(a) When the lock switch is pressed, check that the hazard warning lights flash once simultaneously with the locking operation of all doors.*1

(b) When the unlock switch is pressed, check that the hazard warning lights flash twice simultaneously with the unlocking operation of all doors.*2

(c) When the unlock switch is pressed, check that the hazard warning lights flash twice simultaneously with the unlocking operation of the driver door.*3

(d) When the back door is opened or closed by wireless operation, the hazard warning lights flash twice.

  • *1: Customize item "Wireless Lock Function with Doors Open" is set to "Enable" or "Wireless Lock When Door Opened" is set to "On".
  • *2: Customize item "Wireless Unlock Twice Function" is set to "Disable" or "Remote 2-Press unlock" is set to "Off".
  • *3: Customize item "Wireless Unlock Twice Function" is set to "Enable" or "Remote 2-Press unlock" is set to "On".

CHECK AUTOMATIC LOCKING FUNCTION

(a) Check that the doors relock automatically as long as none of the doors have been opened or all doors have not been locked within approximately 60 seconds of all doors being unlocked by pressing the unlock switch.

(b) Check that the automatic locking function does not operate when any door has been opened within approximately 60 seconds of unlocking the doors by pressing the unlock switch.

(c) Check that the automatic locking function does not operate when all doors have been locked manually (such as using key linked operation, or by pressing the lock switch) within approximately 60 seconds of unlocking the doors by pressing the unlock switch.

CHECK DOOR LOCK STOP FUNCTION THAT OPERATES WHEN A DOOR IS OPEN/AJAR

(a) With a door open or ajar, check that the doors cannot be locked when the lock switch is operated.

HINT:

The doors can be unlocked even when a door is open or ajar.

HINT:

When the wireless lock with doors open function is set to "Enable", this function is canceled even if set to "Enable".

CHECK DOOR AJAR WARNING FUNCTION

(a) Check that the wireless door lock buzzer sounds for approximately 5 seconds when the lock switch is pressed with any of the doors ajar or open.

CHECK PANIC ALARM CONTROL FUNCTION

Click here

CHECK THE POWER BACK DOOR RESERVATION LOCK FUNCTION (w/ Power Back Door System)

(a) Check that the doors lock after the back door is closed when the lock switch is pressed during the back door closing operation via the power back door function.

CHECK THE POWER BACK DOOR WIRELESS ONE MOTION FUNCTION (w/ Power Back Door System)

Click here

CHECK ILLUMINATED ENTRY FUNCTION

Click here

CHECK POWER WINDOW OPERATION FUNCTION

Click here

    READ NEXT:

     Customize Parameters

    CUSTOMIZE PARAMETERS CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM NOTICE: When the customer requests a change in a function, first make sure that the function can be customized. Be sure to m

     Problem Symptoms Table

    PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order

     Terminals Of Ecu

    TERMINALS OF ECU CHECK POWER DISTRIBUTION BOX ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) (a) Remove the main body ECU (multiplex network body ECU) from the power distribution box assem

    SEE MORE:

     Passenger Seat Occupant Classification Sensor "A" Missing Message (B00C087)

    DESCRIPTION DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Test Mode / Check Mode B00C087 Passenger Seat Occupant Classification Sensor "A" Missing Message Either of following conditions is met: The airbag ECU assembly dete

     Brake Hold Switch

    Inspection INSPECTION PROCEDURE 1. INSPECT BRAKE HOLD SWITCH (ELECTRIC PARKING BRAKE SWITCH ASSEMBLY) (a) Check the resistance. (1) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection

    © 2020-2024 Copyright www.tcorollacross.com