Toyota Corolla Cross: Fail-safe Chart
FAIL-SAFE CHART
DESCRIPTION
The fail-safe function minimizes the loss of Continuously Variable Transaxle (CVT) system functions when a sensor or solenoid valve malfunctions.
FAIL-SAFE
HINT:
If any of the following DTCs are stored, the TCM enters fail-safe mode to allow the vehicle to be driven temporarily.
|
DTC Code |
Component |
Fail-Safe Operation |
Fail-Safe Deactivation Condition |
|---|---|---|---|
|
P033531 |
Crankshaft position sensor |
|
Ignition switch turned off |
|
P060747 |
TCM |
- |
- |
|
P061347 |
TCM |
- |
- |
|
P062F44 |
TCM |
- |
- |
|
P070312 |
Stop light switch assembly |
- |
- |
|
P070513 P070562 |
|
|
Ignition switch turned off |
|
P071000 P071011 P071015 |
CVT fluid temperature sensor |
|
Ignition switch turned off |
|
P071512 P071514 P071531 |
Transmission revolution sensor (NT) |
|
Ignition switch turned off |
|
P072012 P072014 P072031 |
Transmission revolution sensor (NOUT) |
|
Ignition switch turned off |
|
P074512 P074514 P07457F |
Shift solenoid valve SL1 |
|
Ignition switch turned off |
|
P077512 P077514 P07757F |
Shift solenoid valve SL2 |
|
Ignition switch turned off |
|
P084000 P084011 P084015 |
Oil pressure sensor |
|
Pass condition detected |
|
P08C312 P08C314 P08C37F |
Shift solenoid valve SLG |
|
Ignition switch turned off |
|
P091400 P091412 P091414 |
Shift stroke sensor |
|
Ignition switch turned off |
|
P17029F |
TCM |
- |
- |
|
P170300 |
|
|
Ignition switch turned off |
|
P274512 P274514 P274531 |
Transmission revolution sensor (NC1) |
|
Ignition switch turned off |
|
P274912 P274914 P274931 |
Transmission revolution sensor (NSS) |
|
Ignition switch turned off |
|
P275600 |
Shift solenoid valve SLU |
|
Ignition switch turned off |
|
P275612 P275614 P27567E |
Shift solenoid valve SLU |
|
Pass condition detected |
|
P281F00 P281F12 P281F14 P281F71 |
Shift solenoid valve SLP |
|
Pass condition detected |
|
P282812 P282814 P28287F |
Shift solenoid valve SLS |
|
Pass condition detected |
|
U010087 |
CAN communication with ECM and TCM |
|
Ignition switch turned off |
|
U012987 |
CAN communication with skid control ECU (brake actuator assembly) and TCM |
Lock-up control prohibited during deceleration |
Ignition switch turned off |
|
U110387 |
CAN communication with Engine Stop and Start ECU and TCM |
Stop and start control is prohibited |
Ignition switch turned off |
READ NEXT:
Data List / Active Test
DATA LIST / ACTIVE TEST
DATA LIST
NOTICE:
In the table below, the values listed under "Normal Condition" are reference
values. Do not depend solely on these reference values when decidi
Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
Continuously Variable Transaxle System
DTC No.
Detection Item
MIL
Note
Link
P033531
C
VEHICLE CONTROL HISTORY (RoB)
VEHICLE CONTROL HISTORY (RoB)
HINT:
The Vehicle Control History stores the history of the reject function and
system protection operations.
The number of occurrences, date and distance are
SEE MORE:
How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT
HINT:
Use the following procedure to troubleshoot the windshield deicer system.
*: Use the GTS.
PROCEDURE
1. VEHICLE BROUGHT TO WORKSHOP
NEXT
2.
CUSTOMER PROBLEM ANALYSIS
HINT:
In troubleshooting, confirm that the pr
How To Proceed With Troubleshooting
PROCEDURE
1. VEHICLE BROUGHT TO WORKSHOP
NEXT
2. CUSTOMER PROBLEM ANALYSIS
HINT: If the malfunction is not reproduced, perform a simulation test.
Click here
For the simulation test, reproduce the driving conditions that wer
